// SPDX-License-Identifier: GPL-2.0-only
/*
 * Project Aurora — JZ08AU-XPA-7J-R3 (MSM8916, 512 MB, ST7735S SPI panel).
 * RAM-BOOT USB1: kernel + UART console + USB peripheral (NCM gadget). Everything that could touch
 * storage, radios or power management is explicitly disabled.
 *
 * Hardware facts from stock Aurora dtb_01 (see NOTES.md S2.1/S12):
 *   console = BLSP1 UART2 serial@78b0000, GPIO4 (TX) / GPIO5 (RX), 115200 8N1.
 * RAM size (memory@80000000 reg) is filled in by lk2nd from SMEM.
 */

/dts-v1/;

#include "msm8916-pm8916.dtsi"	/* + RPM regulators (USB PHY L7/L13) */

/ {
	model = "JZ08AU Aurora (RAM boot USB1)";
	compatible = "jz08au,aurora", "qcom,msm8916";
	chassis-type = "embedded";

	aliases {
		serial0 = &blsp_uart2;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};
};

&blsp_uart2 {
	pinctrl-0 = <&blsp_uart2_console_default>;
	pinctrl-1 = <&blsp_uart2_console_sleep>;
	pinctrl-names = "default", "sleep";
	status = "okay";
};

/* --- RAM boot USB1 safety: no storage, no radios --- */
&sdhc_1 { status = "disabled"; };	/* eMMC: must stay untouched */
&sdhc_2 { status = "disabled"; };
/* usb: see peripheral block below */
&mpss { status = "disabled"; };
&bam_dmux { status = "disabled"; };
&bam_dmux_dma { status = "disabled"; };
&wcnss { status = "disabled"; };	/* WCNSS/pronto remoteproc */

/*
 * USB peripheral only (ChipIdea ci-hdrc + qcom,usb-hs-phy-msm8916, upstream bindings).
 * Stock Aurora: HSUSB_1p8 = L7 1.8 V, HSUSB_3p3 = L13 3.075 V, otg-control = 2 (PMIC VBUS detect),
 * PHY init-seq identical to upstream. VBUS detect via PM8916 USB_IN (as on JZ02). No host, no role switch.
 */
&pm8916_usbin {
	status = "okay";
};

&usb {
	dr_mode = "peripheral";
	extcon = <&pm8916_usbin>;
	status = "okay";
};

&usb_hs_phy {
	extcon = <&pm8916_usbin>;
};