# B9A current Linux DT (running B8F = cache 857c9c30: DTB b8/b8f/out/aurora-b8f.dtb sha256 cc74b57d..., source linux/dts/msm8916-jz08-aurora-b8b.dts)
# decompiled with dtc; display-relevant nodes only. Read-only.

# aurora-b8f.dtb(dtc):409-413
					l6 {
						regulator-min-microvolt = <0x1b7740>;
						regulator-max-microvolt = <0x1b7740>;
						phandle = <0x4e>;
					};

# aurora-b8f.dtb(dtc):466-467
					l17 {
					};

# aurora-b8f.dtb(dtc):1315-1332
			blsp-spi4-default-state {
				phandle = <0x7d>;

				spi-pins {
					pins = "gpio12", "gpio13", "gpio15";
					function = "blsp_spi4";
					drive-strength = <0x0c>;
					bias-disable;
				};

				cs-pins {
					pins = "gpio14";
					function = "gpio";
					drive-strength = <0x10>;
					bias-disable;
					output-high;
				};
			};

# aurora-b8f.dtb(dtc):1334-1340
			blsp-spi4-sleep-state {
				pins = "gpio12", "gpio13", "gpio14", "gpio15";
				function = "gpio";
				drive-strength = <0x02>;
				bias-pull-down;
				phandle = <0x7e>;
			};

# aurora-b8f.dtb(dtc):1763-1857
		display-subsystem@1a00000 {
			status = "disabled";
			compatible = "qcom,mdss";
			reg = <0x1a00000 0x1000 0x1ac8000 0x3000>;
			reg-names = "mdss_phys", "vbif_phys";
			power-domains = <0x13 0x02>;
			clocks = <0x13 0x6d 0x13 0x6e 0x13 0x73>;
			clock-names = "iface", "bus", "vsync";
			interrupts = <0x00 0x48 0x04>;
			resets = <0x13 0x34>;
			interrupt-controller;
			#interrupt-cells = <0x01>;
			#address-cells = <0x01>;
			#size-cells = <0x01>;
			ranges;
			phandle = <0x4a>;

			display-controller@1a01000 {
				compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
				reg = <0x1a01000 0x89000>;
				reg-names = "mdp_phys";
				interrupt-parent = <0x4a>;
				interrupts = <0x00>;
				clocks = <0x13 0x6d 0x13 0x6e 0x13 0x71 0x13 0x73>;
				clock-names = "iface", "bus", "core", "vsync";
				iommus = <0x4b 0x04>;
				phandle = <0xc7>;

				ports {
					#address-cells = <0x01>;
					#size-cells = <0x00>;

					port@0 {
						reg = <0x00>;

						endpoint {
							remote-endpoint = <0x4c>;
							phandle = <0x4f>;
						};
					};
				};
			};

			dsi@1a98000 {
				compatible = "qcom,msm8916-dsi-ctrl", "qcom,mdss-dsi-ctrl";
				reg = <0x1a98000 0x25c>;
				reg-names = "dsi_ctrl";
				interrupt-parent = <0x4a>;
				interrupts = <0x04>;
				assigned-clocks = <0x13 0x2b 0x13 0x2e>;
				assigned-clock-parents = <0x49 0x00 0x49 0x01>;
				clocks = <0x13 0x71 0x13 0x6d 0x13 0x6e 0x13 0x6f 0x13 0x72 0x13 0x70>;
				clock-names = "mdp_core", "iface", "bus", "byte", "pixel", "core";
				phys = <0x49>;
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				vdda-supply = <0x4d>;
				vddio-supply = <0x4e>;
				phandle = <0xc8>;

				ports {
					#address-cells = <0x01>;
					#size-cells = <0x00>;

					port@0 {
						reg = <0x00>;

						endpoint {
							remote-endpoint = <0x4f>;
							phandle = <0x4c>;
						};
					};

					port@1 {
						reg = <0x01>;

						endpoint {
							phandle = <0xc9>;
						};
					};
				};
			};

			phy@1a98300 {
				compatible = "qcom,dsi-phy-28nm-lp";
				reg = <0x1a98300 0xd4 0x1a98500 0x280 0x1a98780 0x30>;
				reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
				#clock-cells = <0x01>;
				#phy-cells = <0x00>;
				clocks = <0x13 0x6d 0x19>;
				clock-names = "iface", "ref";
				vddio-supply = <0x4e>;
				phandle = <0x49>;
			};
		};

# aurora-b8f.dtb(dtc):2144-2153
				mpps@a000 {
					compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp";
					reg = <0xa000>;
					gpio-controller;
					#gpio-cells = <0x02>;
					gpio-ranges = <0x55 0x00 0x00 0x04>;
					interrupt-controller;
					#interrupt-cells = <0x02>;
					phandle = <0x55>;
				};

# aurora-b8f.dtb(dtc):2174-2179
				pwm {
					compatible = "qcom,pm8916-pwm";
					#pwm-cells = <0x02>;
					status = "disabled";
					phandle = <0xd3>;
				};

# aurora-b8f.dtb(dtc):2569-2584
		spi@78b8000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x78b8000 0x500>;
			interrupts = <0x00 0x62 0x04>;
			clocks = <0x13 0x3f 0x13 0x36>;
			clock-names = "core", "iface";
			dmas = <0x6c 0x0a 0x6c 0x0b>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <0x7d>;
			pinctrl-1 = <0x7e>;
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			status = "disabled";
			phandle = <0xee>;
		};

# search for panel/backlight/framebuffer/simple-framebuffer/mipi-dbi/st7735 strings:
(none)

# live board confirmation: see b9a-linux-display.txt (display-subsystem status=disabled, spi@78b8000 status=disabled, no panel/backlight nodes)