B9B-STATE-BEGIN 96.35 345.00 JZ08AU Aurora (RAM boot B9B) 7.2.7-aurora-b9b --- regulators l17 state=disabled uV=2850000 users=0 l6 state=disabled uV=1800000 users=0 l6 0 1 0 unknown 1800mV 0mA 1800mV 1800mV spi0.0-io 0 0mA 0mV 0mV l17 0 1 0 unknown 2850mV 0mA 2850mV 2850mV spi0.0-power 0 0mA 0mV 0mV --- PMIC L6 (sid1 0x4500) / L17 (0x5000): 08 STATUS, 40/41 VSET, 46 EN # PMIC sid1 0x4508 +1 4508: 82 # PMIC sid1 0x4540 +2 4540: 00 4541: 04 # PMIC sid1 0x4546 +1 4546: 80 # PMIC sid1 0x5008 +1 5008: 00 # PMIC sid1 0x5040 +2 5040: 00 5041: 58 # PMIC sid1 0x5046 +1 5046: 00 --- MPP4 0xa340..0xa34f (40 MODE,41 VIN,42 PULL,46 EN,48 AOUT,4a AIN,4c SINK) # PMIC sid0 0xa340 +16 a340: 60 a341: 00 a342: 00 a343: 00 a344: 00 a345: 00 a346: 80 a347: 00 a348: 00 a349: 00 a34a: 00 a34b: 00 a34c: 07 a34d: 00 a34e: 00 a34f: 00 --- dmesg [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -3 [ 0.397114] qcom_scm firmware:scm: SHM Bridge not supported [ 0.401809] qcom_scm firmware:scm: qseecom: found qseecom with version 0x800000 [ 0.406963] qcom_scm firmware:scm: qseecom: untested machine, skipping [ 0.709853] spi_qup 78b8000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 0.996260] qcom-wcnss-pil a204000.remoteproc: supply vddcx not found, using dummy regulator [ 1.007264] a204000.remoteproc.iris: failed to get regulators [ 1.048298] qcom-wcnss-pil a204000.remoteproc: supply vddcx not found, using dummy regulator [ 1.051116] l17: Bringing 0uV into 2850000-2850000uV [ 1.419418] remoteproc remoteproc1: Direct firmware load for wcnss.mdt failed with error -2 [ 1.430342] remoteproc remoteproc1: Direct firmware load for wcnss.mdt failed with error -2 [ 1.430518] [drm] Initialized panel-mipi-dbi 1.0.0 for spi0.0 on minor 0 [ 1.436520] remoteproc remoteproc1: request_firmware failed: -2 [ 1.452334] panel-mipi-dbi-spi spi0.0: [drm] fb0: panel-mipi-dbid frame buffer device [ 1.460144] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.485907] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 [ 1.489931] cfg80211: failed to load regulatory.db [ 7.154116] [init] B1: modem FAT mounted RO at /firmware, firmware path /firmware/image [ 74.564849] wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vUnknown with 19.2MHz XO' and CRM version 'CNSS-PR-1-4-2-c4-00084' [ 74.564953] wcn36xx: firmware API 1.5.1.2, 41 stations, 2 bssids [ 74.617786] [aurora-wifi] wlan0 up addr= (wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vUnknown with 19.2MHz XO') --- devices crw------- 1 root root 29, 0 Oct 2 20:58 /dev/fb0 /dev/dri: total 0 drwxr-xr-x 3 root root 80 Oct 2 20:58 . drwxr-xr-x 11 root root 4220 Oct 2 20:58 .. drwxr-xr-x 2 root root 60 Oct 2 20:58 by-path crw------- 1 root root 226, 0 Oct 2 20:58 card0 /sys/bus/spi/devices: spi0.0 /sys/class/backlight: backlight /sys/class/drm: card0 card0-SPI-1 version /sys/class/graphics: fb0 fb0 name=panel-mipi-dbid fb0 bits_per_pixel=16 fb0 virtual_size=128,128 fb0 stride=256 backlight bl_power=4 backlight brightness=1 backlight actual_brightness=1 backlight max_brightness=1 --- gpio gpio12 : in low func1 12mA no pull gpio13 : in low func1 12mA no pull gpio14 : in high func1 2mA no pull gpio15 : in low func1 12mA no pull gpio116 : out low func0 8mA no pull gpio118 : out high func0 8mA no pull mpp4 : out sink vin-0 0 low pin 12 (GPIO_12): device 78b8000.spi function blsp_spi4 group gpio12 pin 13 (GPIO_13): device 78b8000.spi function blsp_spi4 group gpio13 pin 14 (GPIO_14): device 78b8000.spi function blsp_spi4 group gpio14 pin 15 (GPIO_15): device 78b8000.spi function blsp_spi4 group gpio15 pin 116 (GPIO_116): device spi0.0 function gpio group gpio116 pin 118 (GPIO_118): device spi0.0 function gpio group gpio118 pin 3 (mpp4): --- clk blsp1_qup4_spi_apps_clk_src 0 0 0 19200000 0 0 50000 N deviceless no_connection_id gcc_blsp1_qup4_spi_apps_clk 0 0 0 19200000 0 0 50000 N 78b8000.spi core --- emmc 1119 43 193701 2473 0 0 0 0 0 1176 2473 0 0 0 0 0 0 B9B-STATE-END