[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd030] [ 0.000000] Linux version 7.2.7-aurora-b10b3 (q@aiaiai) (aarch64-linux-gnu-gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #4 SMP PREEMPT Sat Oct 3 21:11:16 +06 2026 [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: JZ08AU Aurora (RAM boot B10B-3 Test D) [ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000078b0000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [msm_serial_dm0] enabled [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] OF: reserved mem: 0x000000008e700000..0x000000008e7fffff (1024 KiB) nomap non-reusable mba [ 0.000000] OF: reserved mem: 0x0000000086000000..0x00000000862fffff (3072 KiB) nomap non-reusable tz-apps@86000000 [ 0.000000] OF: reserved mem: 0x0000000086300000..0x00000000863fffff (1024 KiB) nomap non-reusable smem@86300000 [ 0.000000] OF: reserved mem: 0x0000000086400000..0x00000000864fffff (1024 KiB) nomap non-reusable hypervisor@86400000 [ 0.000000] OF: reserved mem: 0x0000000086500000..0x000000008667ffff (1536 KiB) nomap non-reusable tz@86500000 [ 0.000000] OF: reserved mem: 0x0000000086680000..0x00000000866fffff (512 KiB) nomap non-reusable reserved@86680000 [ 0.000000] OF: reserved mem: 0x0000000086700000..0x00000000867dffff (896 KiB) nomap non-reusable rmtfs@86700000 [ 0.000000] OF: reserved mem: 0x00000000867e0000..0x00000000867fffff (128 KiB) nomap non-reusable rfsa@867e0000 [ 0.000000] OF: reserved mem: 0x0000000086800000..0x000000008b5fffff (79872 KiB) nomap non-reusable mpss@86800000 [ 0.000000] OF: reserved mem: 0x000000008b600000..0x000000008bbfffff (6144 KiB) nomap non-reusable wcnss@8b600000 [ 0.000000] cma: Reserved 32 MiB at 0x000000009de00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -3 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000085ffffff] [ 0.000000] node 0: [mem 0x0000000086000000-0x000000008bbfffff] [ 0.000000] node 0: [mem 0x000000008bc00000-0x000000008e6fffff] [ 0.000000] node 0: [mem 0x000000008e700000-0x000000008e7fffff] [ 0.000000] node 0: [mem 0x000000008e800000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49176 r0 d32744 u81920 [ 0.000000] pcpu-alloc: s49176 r0 d32744 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 843419 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: ARM errata 826319, 827319, 824069, or 819472 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: earlycon console=tty0 console=ttyMSM0,115200n8 ignore_loglevel loglevel=8 rdinit=/init fbcon=font:6x8 consoleblank=0 [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000009d480000-0x000000009d580000] (1MB) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.000000] arch_timer: cp15 timer running at 19.20MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.010997] Console: colour dummy device 80x25 [ 0.018680] printk: legacy console [tty0] enabled [ 0.024094] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.027983] pid_max: default: 32768 minimum: 301 [ 0.038476] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.042914] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.050290] VFS: Finished mounting rootfs on nullfs [ 0.060241] rcu: Hierarchical SRCU implementation. [ 0.062531] rcu: Max phase no-delay instances is 1000. [ 0.067629] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.073521] smp: Bringing up secondary CPUs ... [ 0.081587] Detected VIPT I-cache on CPU1 [ 0.081765] CPU1: Booted secondary processor 0x0000000001 [0x410fd030] [ 0.082623] Detected VIPT I-cache on CPU2 [ 0.082786] CPU2: Booted secondary processor 0x0000000002 [0x410fd030] [ 0.083617] Detected VIPT I-cache on CPU3 [ 0.083772] CPU3: Booted secondary processor 0x0000000003 [0x410fd030] [ 0.083908] smp: Brought up 1 node, 4 CPUs [ 0.116693] SMP: Total of 4 processors activated. [ 0.120757] CPU: All CPU(s) started at EL1 [ 0.125551] CPU features: detected: 32-bit EL0 Support [ 0.129531] CPU features: detected: CRC32 instructions [ 0.134672] CPU features: detected: PMUv3 [ 0.139809] alternatives: applying system-wide alternatives [ 0.145134] Memory: 341780K/524288K available (13184K kernel code, 3374K rwdata, 6032K rodata, 1472K init, 469K bss, 147404K reserved, 32768K cma-reserved) [ 0.150021] devtmpfs: initialized [ 0.178365] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.178530] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear). [ 0.185543] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.193306] 0 pages in range for non-PLT usage [ 0.193314] 518096 pages in range for PLT usage [ 0.204162] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.209502] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.215974] thermal_sys: Registered thermal governor 'step_wise' [ 0.215987] thermal_sys: Registered thermal governor 'power_allocator' [ 0.222453] cpuidle: using governor menu [ 0.234870] NET: Registered PF_QIPCRTR protocol family [ 0.238958] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.243821] ASID allocator initialised with 32768 entries [ 0.251094] Serial: AMBA PL011 UART driver [ 0.258848] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode [ 0.269061] /soc@0/usb@78d9000: Fixed dependency cycle(s) with /soc@0/usb@78d9000/ulpi/phy [ 0.269174] /soc@0/usb@78d9000/ulpi/phy: Fixed dependency cycle(s) with /soc@0/usb@78d9000 [ 0.276342] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@b000000 [ 0.298058] /soc@0/usb@78d9000: Fixed dependency cycle(s) with /soc@0/usb@78d9000/ulpi/phy [ 0.298237] /soc@0/usb@78d9000/ulpi/phy: Fixed dependency cycle(s) with /soc@0/usb@78d9000 [ 0.309127] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.313538] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.320377] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.326441] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.333385] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.339460] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.346405] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.352480] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.365206] iommu: Default domain type: Translated [ 0.365492] iommu: DMA domain TLB invalidation policy: strict mode [ 0.371469] pps_core: LinuxPPS API ver. 1 registered [ 0.376535] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.381675] PTP clock support registered [ 0.390857] EDAC MC: Ver: 3.0.0 [ 0.395038] scmi_core: SCMI protocol bus registered [ 0.398751] qcom_scm: convention: smc arm 32 [ 0.402395] qcom_scm firmware:scm: SHM Bridge not supported [ 0.407088] qcom_scm firmware:scm: qseecom: found qseecom with version 0x800000 [ 0.412252] qcom_scm firmware:scm: qseecom: untested machine, skipping [ 0.420316] FPGA manager framework [ 0.427663] clocksource: Switched to clocksource arch_sys_counter [ 0.429794] VFS: Disk quotas dquot_6.6.0 [ 0.435731] VFS: Dquot-cache hash table entries: 512 (4096 bytes) [ 0.448886] NET: Registered PF_INET protocol family [ 0.449067] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.453500] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.459920] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.468152] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.476177] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.483992] TCP: Hash tables configured (established 4096 bind 4096) [ 0.490969] UDP hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.497537] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.505632] Unpacking initramfs... [ 0.510797] Initialise system trusted keyrings [ 0.513106] workingset: timestamp_bits=46 (anon: 41) max_order=17 bucket_order=0 (anon: 0) [ 0.517820] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.525915] 9p: Installing v9fs 9p2000 file system support [ 0.531865] NET: Registered PF_ALG protocol family [ 0.536846] Key type asymmetric registered [ 0.541576] Asymmetric key parser 'x509' registered [ 0.545783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 238) [ 0.550447] io scheduler mq-deadline registered [ 0.558084] io scheduler kyber registered [ 0.562394] io scheduler bfq registered [ 0.576719] ledtrig-cpu: registered to indicate activity on CPUs [ 0.577249] IPMI message handler: version 39.2 [ 0.581970] ipmi device interface [ 0.586360] ipmi_si: IPMI System Interface driver [ 0.589751] ipmi_si: Unable to find any System Interface(s) [ 0.614172] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.618353] msm_serial 78b0000.serial: msm_serial: detected port #0 [ 0.619358] msm_serial 78b0000.serial: uartclk = 7372800 [ 0.626066] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 17, base_baud = 460800) is a MSM [ 0.631135] msm_serial: console setup on port #0 [ 0.631276] printk: legacy console [ttyMSM0] enabled [ 0.639865] printk: legacy bootconsole [msm_serial_dm0] disabled [ 0.652499] msm_serial: driver initialized [ 0.658363] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208 [ 0.678713] loop: module loaded [ 0.715125] spi_qup 78b8000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 0.717082] spmi_pmic_arb 200f000.spmi: PMIC arbiter version v2 (0x20010000) [ 0.740139] tun: Universal TUN/TAP device driver, 1.6 [ 0.741361] VFIO - User Level meta-driver version: 0.3 [ 0.749869] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: registered as rtc0 [ 0.749973] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T00:00:06 UTC (6) [ 0.756440] i2c_dev: i2c /dev entries driver [ 0.770417] input: pm8941_pwrkey as /devices/platform/soc@0/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:pwrkey/input/input0 [ 0.784191] qcom_rng 22000.rng: TRNG support not detected [ 0.785010] clocksource: arch_mmio_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.789391] arch-timer-mmio b020000.timer: mmio timer running at 19.20MHz (virt) [ 0.809746] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 (0,8000003f) counters available [ 0.811569] cs_system_cfg: CoreSight Configuration manager initialised [ 0.821501] gnss: GNSS driver registered with major 504 [ 0.826317] NET: Registered PF_INET6 protocol family [ 0.831038] Segment Routing with IPv6 [ 0.834995] In-situ OAM (IOAM) with IPv6 [ 0.838539] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.843183] NET: Registered PF_PACKET protocol family [ 0.848506] 9pnet: Installing 9P2000 support [ 0.853420] Key type dns_resolver registered [ 0.868235] registered taskstats version 1 [ 0.868308] Loading compiled-in X.509 certificates [ 0.906479] qcom-smsm smsm: mbox_request_channel: can't parse "mboxes" property [ 0.906556] qcom-smsm smsm: mbox_request_channel: can't parse "mboxes" property [ 0.912704] qcom-smsm smsm: mbox_request_channel: can't parse "mboxes" property [ 0.925056] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: safety timer 8 min (TCHG_MAX 0x01), enabled [ 0.928870] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: supervisor v3: charge 4100000 uV, hold 4000000 uV, full-min 4050000 uV, cv 5 min, IBAT_MAX code 4, ovp 4250000 uV [ 0.959747] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: supervisor INIT -> CHARGING (probe, usb present), vbat 3929739 uV [ 0.973958] s3: Bringing 0uV into 1250000-1250000uV [ 0.974499] s4: Bringing 0uV into 1850000-1850000uV [ 0.976813] remoteproc remoteproc0: releasing 4080000.remoteproc [ 0.983409] l2: Bringing 0uV into 1200000-1200000uV [ 0.985976] qcom-wcnss-pil a204000.remoteproc: supply vddcx not found, using dummy regulator [ 0.994378] l5: Bringing 0uV into 1800000-1800000uV [ 0.994886] a204000.remoteproc.iris: failed to get regulators [ 1.007128] l6: Bringing 0uV into 1800000-1800000uV [ 1.007427] remoteproc remoteproc0: releasing a204000.remoteproc [ 1.012905] l7: Bringing 0uV into 1800000-1800000uV [ 1.024161] l8: Bringing 0uV into 2900000-2900000uV [ 1.028495] l9: Bringing 0uV into 3300000-3300000uV [ 1.033751] l11: Bringing 0uV into 2950000-2950000uV [ 1.035179] remoteproc remoteproc0: 4080000.remoteproc is available [ 1.038183] l12: Bringing 0uV into 1800000-1800000uV [ 1.046878] qcom-wcnss-pil a204000.remoteproc: supply vddcx not found, using dummy regulator [ 1.049402] l13: Bringing 0uV into 3075000-3075000uV [ 1.055729] remoteproc remoteproc1: a204000.remoteproc is available [ 1.063764] l17: Bringing 0uV into 2850000-2850000uV [ 1.073142] gcc-msm8916 1800000.clock-controller: sync_state() pending due to 7824900.mmc [ 1.079566] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.088167] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.095759] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.100601] clk: Disabling unused clocks [ 1.107696] PM: genpd: Disabling unused power domains [ 1.107850] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA [ 1.235705] mmc0: Card appears overclocked; req 177770000 Hz, actual 177777777 Hz [ 1.235785] mmc0: Card appears overclocked; req 177770000 Hz, actual 177777777 Hz [ 1.244363] mmc0: new HS200 MMC card at address 0001 [ 1.250496] mmcblk0: mmc0:0001 H4G2a 3.64 GiB [ 1.259871] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 [ 1.264782] mmcblk0boot0: mmc0:0001 H4G2a 4.00 MiB [ 1.276744] mmcblk0boot1: mmc0:0001 H4G2a 4.00 MiB [ 1.282097] mmcblk0rpmb: mmc0:0001 H4G2a 4.00 MiB, chardev (505:0) [ 1.414099] Freeing initrd memory: 15704K [ 1.414422] remoteproc remoteproc1: Direct firmware load for wcnss.mdt failed with error -2 [ 1.417218] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 [ 1.417238] cfg80211: failed to load regulatory.db [ 1.417274] remoteproc remoteproc1: powering up a204000.remoteproc [ 1.417336] [drm] Initialized panel-mipi-dbi 1.0.0 for spi0.0 on minor 0 [ 1.438970] remoteproc remoteproc1: Direct firmware load for wcnss.mdt failed with error -2 [ 1.439788] Freeing unused kernel memory: 1472K [ 1.444609] remoteproc remoteproc1: request_firmware failed: -2 [ 1.452897] Run /init as init process [ 1.463120] with arguments: [ 1.463125] /init [ 1.463129] with environment: [ 1.463131] HOME=/ [ 1.463134] TERM=linux [ 1.794319] Console: switching to colour frame buffer device 21x16 [ 1.847464] panel-mipi-dbi-spi spi0.0: [drm] fb0: panel-mipi-dbid frame buffer device [ 2.110371] [init] EMMC: all 30 block devices read-only (getro=1) [ 7.097253] [init] B1: modem FAT mounted RO at /firmware, firmware path /firmware/image [ 7.141402] configfs-gadget.aurora gadget.0: HOST MAC [ 7.145761] configfs-gadget.aurora gadget.0: MAC [ 7.150316] l13: voltage operation not allowed [ 7.157695] [init] usb gadget bound to UDC 'ci_hdrc.0' [ 7.177802] [init] ncm ifname='usb0' dev_addr= host_addr= [ 7.193696] [init] network: usb0 172.16.42.1/24 up (static, no DHCP) [ 7.216728] [init] T4: telnetd started on 172.16.42.1:23 [ 7.320058] [aurora-display] start: fb0=panel-mipi-dbid fbcon=bound conn=enabled/On l17_users=1 bl_power=4 bl=1 [ 7.342791] [aurora-display] fbcon bound to fb0 [ 7.392077] [aurora-display] display pipe already enabled (by fbcon takeover) - no unblank needed [ 7.411305] [aurora-display] backlight on -> bl_power=0 actual_brightness=1 [ 7.475217] [aurora-display] === DISPLAY READY fb0=panel-mipi-dbid fbcon=bound conn=enabled/On l17_users=1 bl_power=0 bl=1 [ 9.363506] [aurora-modem] === START (conf /etc/aurora/modem.conf, apn 'internet.beeline.ru', ip-type ipv4) [ 9.365261] [aurora-wifi] === WIFI START (wait for modem START OK/FAIL up to 300s) [ 9.447447] remoteproc remoteproc0: powering up 4080000.remoteproc [ 9.450386] remoteproc remoteproc0: Booting fw image mba.mbn, size 234176 [ 9.461387] [aurora-modem] STATE OFF -> RMTFS_READY [ 9.468455] [aurora-modem] STATE RMTFS_READY -> MPSS_BOOTING [ 9.503928] qcom-q6v5-mss 4080000.remoteproc: MBA booted without debug policy, loading mpss [ 10.053477] remoteproc remoteproc0: remote processor 4080000.remoteproc is now up [ 10.148246] [aurora-modem] MSS running after 0.7s [ 10.158874] [aurora-modem] STATE MPSS_BOOTING -> MPSS_RUNNING [ 10.636738] wwan wwan0: port wwan0at0 attached [ 10.642778] wwan wwan0: port wwan0at1 attached [ 10.799778] wwan wwan0: port wwan0qmi0 attached [ 10.806413] [aurora-modem] wwan0qmi0 + wwan0 present after 0.6s; +2 s (JZ02 rpmsg_wwan_ctrl port-race guard, proven start_post) [ 12.996684] [aurora-modem] STATE MPSS_RUNNING -> QMI_READY [ 13.007617] [aurora-modem] DMS Mode: 'shutting-down' after 0.2s [ 13.110110] [aurora-modem] TIME probe 1 [QMI_READY]: dms_ms=3028 dms_utc=315964803.028 nitz=none dms-nitz=- clock=18 -> INVALID (year<2026) [ 13.164331] [aurora-modem] STATE QMI_READY -> SIM_READY [ 13.173403] [aurora-modem] UIM card present, USIM app ready after 0.1s [ 13.271013] [aurora-modem] TIME probe 2 [SIM_READY]: dms_ms=3192 dms_utc=315964803.192 nitz=none dms-nitz=- clock=19 -> INVALID (year<2026) [ 13.281143] [aurora-modem] SET: qmicli -p -d /dev/wwan0qmi0 --dms-set-operating-mode=online (retried only on DeviceNotReady, <= 30s) [ 16.529325] [aurora-modem] DMS online after 3.2s [ 16.536917] [aurora-modem] STATE SIM_READY -> RADIO_ONLINE [ 16.640507] [aurora-modem] TIME probe 3 [RADIO_ONLINE]: dms_ms=6555 dms_utc=315964806.555 nitz=none dms-nitz=- clock=22 -> INVALID (year<2026) [ 16.979764] [aurora-modem] REG t+0.3s: not-registered-searching / PS detached / none (none, ) - pci= si=/ cl=/ [ 17.095298] [aurora-modem] TIME probe 4 [REG:not-registered-searching/detached]: dms_ms=7012 dms_utc=315964807.012 nitz=none dms-nitz=- clock=22 -> INVALID (year<2026) [ 20.395815] [aurora-modem] REG t+3.7s: registered / PS attached / available (none, ps) 250-99 pci=390 si=7661/156416008 cl=7661/156416008 [ 20.506041] [aurora-modem] TIME probe 5 [REG:registered/attached]: dms_ms=1475096295194 dms_utc=1791061095.194 nitz=2026-10-03 20:58:15 dms-nitz=+0.23 clock=26 -> VALID (ok) [ 21.254322] [aurora-modem] TIME SET rc=0 source=qmi-dms phase=REG:registered/attached old=26 (1970-01-01 00:00:26) new=1791061096 (2026-10-03 20:58:16) uptime=21.10 dms-nitz=+0.23 validation=VALID rtc=untouched [ 21.286781] [aurora-modem] registered: MCC: '250' MNC: '99' Description: 'Beeline' MCC: '250' MNC: '99' after 4.6s [ 21.297419] [aurora-modem] STATE RADIO_ONLINE -> REGISTERED [ 21.401340] [aurora-modem] TIME probe 6 [REGISTERED]: dms_ms=1475096296094 dms_utc=1791061096.094 nitz=2026-10-03 20:58:16 dms-nitz=+0.13 clock=1791061096 -> VALID (ok) [ 21.474087] udevd[2035]: starting version 3.2.14 [ 21.480613] udevd[2035]: specified group 'tty' unknown [ 21.482295] udevd[2035]: specified group 'dialout' unknown [ 21.486299] udevd[2035]: specified group 'kmem' unknown [ 21.491721] udevd[2035]: specified group 'input' unknown [ 21.497662] udevd[2035]: specified group 'video' unknown [ 21.502500] udevd[2035]: specified group 'audio' unknown [ 21.507550] udevd[2035]: specified group 'lp' unknown [ 21.512749] udevd[2035]: specified group 'disk' unknown [ 21.518415] udevd[2035]: specified group 'cdrom' unknown [ 21.550184] udevd[2038]: starting eudev-3.2.14 [ 21.931182] [aurora-modem] udevd started [ 21.963508] [aurora-modem] dbus started [ 21.980761] [aurora-modem] polkitd started [ 22.003877] [aurora-modem] ModemManager started pid 2081 (log mm-0.log) [ 70.808580] [aurora-modem] MM modem 0 detected after 48.8s [ 70.911054] [aurora-modem] STATE REGISTERED -> MM_READY [ 71.111858] [aurora-modem] MM state disabled after 0.2s [ 71.260995] [aurora-modem] mmcli -m 0 --simple-connect="apn=internet.beeline.ru,user=beeline,password=***,allowed-auth=pap,ip-type=ipv4" [ 71.390417] wwan wwan0: port wwan0at0 disconnected [ 83.617798] [aurora-modem] MM state connected, registration: home [ 83.710508] [aurora-modem] bearer 1: wwan0 10.36.120.0/20 gw 10.36.120.1 dns 10.10.22.3,194.186.191.1 mtu 1500 [ 83.772961] [aurora-modem] STATE MM_READY -> BEARER_CONNECTED [ 83.785248] [aurora-modem] === START OK in 74.4s (wwan0 10.36.120.0/20, routes: 10.10.22.3 194.186.191.1 77.88.8.8 1.1.1.1 ) [ 83.892146] [aurora-modem] TIME probe 7 [BEARER_CONNECTED]: dms_ms=1475096358585 dms_utc=1791061158.585 nitz=2026-10-03 20:59:18 dms-nitz=+0.62 clock=1791061158 -> VALID (ok) [ 84.014015] [aurora-wifi] modem gate after 74s: [83.63] === START OK in 74.4s (wwan0 10.36.120.0/20, routes: 10.10.22.3 194.186. [ 84.031184] remoteproc remoteproc1: powering up a204000.remoteproc [ 84.033086] remoteproc remoteproc1: Booting fw image wcnss.mdt, size 7260 [ 84.507462] remoteproc remoteproc1: remote processor a204000.remoteproc is now up [ 84.518186] [aurora-wifi] WCNSS /sys/class/remoteproc/remoteproc1 state=running [ 84.628468] qcom_wcnss_ctrl remoteproc1:smd-edge.WCNSS_CTRL.-1.-1: WCNSS Version 1.5 1.2 [ 84.647372] wcn36xx: mac address: [ 86.307171] wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vUnknown with 19.2MHz XO' and CRM version 'CNSS-PR-1-4-2-c4-00084' [ 86.310783] wcn36xx: firmware API 1.5.1.2, 41 stations, 2 bssids [ 86.347853] [aurora-wifi] wlan0 up addr= (wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vUnknown with 19.2MHz XO') [ 87.401037] [aurora-wifi] === AP ENABLED ssid=aurora-b8f ch=6 pid=3996 in 78.03s