### uartlog start 2026-09-30T02:01:19.061000 /dev/ttyUSB0 115200 8N1 02:01:21.061 02:01:21.261 [2]+ Done nc -l -p 5583 0 02:01:25.266 [ 0.374317] PTP clock support registered 02:01:25.266 [ 0.383503] EDAC MC: Ver: 3.0.0 02:01:25.266 [ 0.387687] scmi_core: SCMI protocol bus registered 02:01:25.266 [ 0.391395] qcom_scm: convention: smc arm 32 02:01:25.266 [ 0.395043] qcom_scm firmware:scm: SHM Bridge not supported 02:01:25.266 [ 0.399739] qcom_scm firmware:scm: qseecom: found qseecom with version 0x800000 02:01:25.266 [ 0.404890] qcom_scm firmware:scm: qseecom: untested machine, skipping 02:01:25.266 [ 0.412891] FPGA manager framework 02:01:25.266 [ 0.420252] clocksource: Switched to clocksource arch_sys_counter 02:01:25.266 [ 0.422441] VFS: Disk quotas dquot_6.6.0 02:01:25.266 [ 0.428345] VFS: Dquot-cache hash table entries: 512 (4096 bytes) 02:01:25.266 [ 0.441456] NET: Registered PF_INET protocol family 02:01:25.266 [ 0.441613] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) 02:01:25.266 [ 0.445986] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) 02:01:25.266 [ 0.452483] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 02:01:25.266 [ 0.460715] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) 02:01:25.266 [ 0.468736] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) 02:01:25.266 [ 0.476560] TCP: Hash tables configured (established 4096 bind 4096) 02:01:25.266 [ 0.483529] UDP hash table entries: 256 (order: 2, 16384 bytes, linear) 02:01:25.266 [ 0.490093] NET: Registered PF_UNIX/PF_LOCAL protocol family 02:01:25.266 [ 0.496648] Unpacking initramfs... 02:01:25.266 [ 0.503520] Initialise system trusted keyrings 02:01:25.266 [ 0.505676] workingset: timestamp_bits=46 (anon: 41) max_order=17 bucket_order=0 (anon: 0) 02:01:25.266 [ 0.510400] squashfs: version 4.0 (2009/01/31) Phillip Lougher 02:01:25.266 [ 0.518405] 9p: Installing v9fs 9p2000 file system support 02:01:25.266 [ 0.524437] NET: Registered PF_ALG protocol family 02:01:25.266 [ 0.529409] Key type asymmetric registered 02:01:25.266 [ 0.534143] Asymmetric key parser 'x509' registered 02:01:25.266 [ 0.538343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) 02:01:25.466 [ 0.543009] io scheduler mq-deadline registered 02:01:25.466 [ 0.550649] io scheduler kyber registered 02:01:25.466 [ 0.554965] io scheduler bfq registered 02:01:25.466 [ 0.568082] ledtrig-cpu: registered to indicate activity on CPUs 02:01:25.466 [ 0.568543] IPMI message handler: version 39.2 02:01:25.466 [ 0.573258] ipmi device interface 02:01:25.466 [ 0.577743] ipmi_si: IPMI System Interface driver 02:01:25.466 [ 0.581074] ipmi_si: Unable to find any System Interface(s) 02:01:25.466 [ 0.604448] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 02:01:25.466 [ 0.608500] msm_serial 78b0000.serial: msm_serial: detected port #0 02:01:25.466 [ 0.609609] msm_serial 78b0000.serial: uartclk =`+\x82r\xb2\x92\x8a\xa2\x82\x9a\xea\x81msm_serial: console setup on port #0 02:01:25.466 [ 0.621528] printk: legacy console [ttyMSM0] enabled 02:01:25.466 [ 0.621528] printk: legacy console [ttyMSM0] enabled 02:01:25.466 [ 0.630121] printk: legacy bootconsole [msm_serial_dm0] disabled 02:01:25.466 [ 0.630121] printk: legacy bootconsole [msm_serial_dm0] disabled 02:01:25.466 [ 0.644944] msm_serial: driver initialized 02:01:25.466 [ 0.648544] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208 02:01:25.466 [ 0.668025] loop: module loaded 02:01:25.466 [ 0.704549] spmi_pmic_arb 200f000.spmi: PMIC arbiter version v2 (0x20010000) 02:01:25.466 [ 0.721434] tun: Universal TUN/TAP device driver, 1.6 02:01:25.466 [ 0.722202] VFIO - User Level meta-driver version: 0.3 02:01:25.466 [ 0.730632] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: registered as rtc0 02:01:25.466 [ 0.730725] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T00:59:00 UTC (3540) 02:01:25.466 [ 0.737700] i2c_dev: i2c /dev entries driver 02:01:25.667 [ 0.751368] input: pm8941_pwrkey as /devices/platform/soc@0/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:pwrkey/input/input0 02:01:25.667 [ 0.763968] qcom_rng 22000.rng: TRNG support not detected 02:01:25.667 [ 0.766364] clocksource: arch_mmio_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns 02:01:25.667 [ 0.770918] arch-timer-mmio b020000.timer: mmio timer running at 19.20MHz (virt) 02:01:25.667 [ 0.788025] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 (0,8000003f) counters available 02:01:25.667 [ 0.790909] cs_system_cfg: CoreSight Configuration manager initialised 02:01:25.667 [ 0.801629] gnss: GNSS driver registered with major 505 02:01:25.667 [ 0.806499] NET: Registered PF_INET6 protocol family 02:01:25.667 [ 0.811754] Segment Routing with IPv6 02:01:25.667 [ 0.815381] In-situ OAM (IOAM) with IPv6 02:01:25.667 [ 0.818947] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 02:01:25.667 [ 0.823540] NET: Registered PF_PACKET protocol family 02:01:25.667 [ 0.828893] 9pnet: Installing 9P2000 support 02:01:25.667 [ 0.833765] Key type dns_resolver registered 02:01:25.667 [ 0.848083] registered taskstats version 1 02:01:25.667 [ 0.848128] Loading compiled-in X.509 certificates 02:01:25.667 [ 0.874162] Freeing initrd memory: 5600K 02:01:25.667 [ 0.885055] qcom-smsm smsm: mbox_request_channel: can't parse "mboxes" property 02:01:25.667 [ 0.885110] qcom-smsm smsm: mbox_request_channel: can't parse "mboxes" property 02:01:25.667 [ 0.891222] qcom-smsm smsm: mbox_request_channel: can't parse "mboxes" property 02:01:25.667 [ 0.928490] msm_hsusb 78d9000.usb: Failed to create device link (0x180) with supplier remoteproc for /soc@0/usb@78d9000/ulpi/phy 02:01:25.667 [ 0.933965] remoteproc remoteproc0: releasing 4080000.remoteproc 02:01:25.667 [ 0.945304] remoteproc remoteproc0: releasing 4080000.remoteproc 02:01:25.867 [ 0.950128] s3: Bringing 0uV into 1250000-1250000uV 02:01:25.867 [ 0.951492] s4: Bringing 0uV into 1850000-1850000uV 02:01:25.867 [ 0.956685] l2: Bringing 0uV into 1200000-1200000uV 02:01:25.867 [ 0.961186] l5: Bringing 0uV into 1800000-1800000uV 02:01:25.867 [ 0.962510] remoteproc remoteproc0: releasing 4080000.remoteproc 02:01:25.867 [ 0.970707] l6: Bringing 0uV into 1800000-1800000uV 02:01:25.867 [ 0.971845] gcc-msm8916 1800000.clock-controller: sync_state() pending due to 4080000.remoteproc 02:01:25.867 [ 0.976903] l7: Bringing 0uV into 1800000-1800000uV 02:01:25.867 [ 0.981190] gcc-msm8916 1800000.clock-controller: sync_state() pending due to 7824900.mmc 02:01:25.867 [ 0.990726] l8: Bringing 0uV into 2900000-2900000uV 02:01:25.867 [ 0.995220] clk: Disabling unused clocks 02:01:25.867 [ 1.003374] l9: Bringing 0uV into 3300000-3300000uV 02:01:25.867 [ 1.008032] PM: genpd: Disabling unused power domains 02:01:25.867 [ 1.012451] l11: Bringing 0uV into 2950000-\xf2[ 1.027067] l13: Bringing 0uV into 3075000-3075000uV 02:01:25.867 [ 1.029152] Freeing unused kernel memory: 1408K 02:01:25.867 [ 1.031210] Run /init as init process 02:01:25.867 [ 1.033163] remoteproc remoteproc0: 4080000.remoteproc is available 02:01:25.867 [ 1.035373] with arguments: 02:01:25.867 [ 1.045254] /init 02:01:25.867 [ 1.048373] with environment: 02:01:25.867 [ 1.050615] HOME=/ 02:01:25.867 [ 1.053583] TERM=linux 02:01:25.867 02:01:25.867 === AURORA RAM BOOT QMI1 === 02:01:25.867 Linux (none) 7.2.7-aurora-bam1 #5 SMP PREEMPT Wed Sep 30 04:59:18 +06 2026 aarch64 GNU/Linux 02:01:25.867 --- model 02:01:25.867 JZ08AU Aurora (RAM boot BAM1) 02:01:25.867 --- cmdline 02:01:25.867 earlycon console=ttyMSM0,115200n8 ignore_loglevel loglevel=8 rdinit=/init 02:01:25.867 [ 1.100552] mmc0: SDHCI controller on 7824900.mm\x92\xa2ʂ\x82rj\xb5\x8d\xcb 02:01:26.067 \x81 1.220366] mmc0: Card appears overclocked; req 177770000 Hz, actual 177\x82\x8aj 02:01:26.067 [ 1.235633] mmcblk0: mmc0:0001 H4G2.&\x82\xc97 02:01:26.668 [ 1.258535] mmcblk0boot0: mmEMMC-RO-SUMMARY devices=30 all_ro=YES 02:01:26.668 [init] EMMC: all 30 block devices read-only (getro=1)[ 1.891969] [init] EMMC: all 30 block devices read-only (getro=1) 02:01:26.668 02:01:29.268 B1 modem partition by PARTLABEL: modem -> /dev/mmcblk0p1 ro=1 02:01:31.869 VV\xa2\x9a\xbabJ\xbd\x8d\xa1\x85\xc9͕\xd1\xf5iso8859-1,shortname=lower,errors=remountinit] B1: modem FAT mounted RO at /firmware, firmware path /fir[ 7.009035] [init] B1: modem FAT mounted RO at /firmware, firmware path /firmware/image 02:01:31.869 mware/image 02:01:31.869 --- /sys/class/udc: 02:01:31.869 total 0 02:01:31.869 lrwxrwxrwx 1 0 0 0 Jan 1 00:59 ci_hdrc.0 -> ../../devices/platform/soc@0/78d9000.usb/ci_hdrc.0/udc/ci_hdrc.0 02:01:31.869 [ 7.042595] configfs-gadget.aurora gadget.0: HOST MAC 02:01:31.869 [ 7.042657] configfs-gadget.aurora gadget.0: MAC 02:01:31.869 [ 7.048328] l13: voltage operation not allowed 02:01:31.869 [init] usb gadget bound to UDC 'ci_hdrc.0' 02:01:31.869 [ 7.058963] [init] usb gadget bound to UDC 'ci_hdrc.0' 02:01:31.869 [init] ncm ifname='usb0' dev_addr= host_addr=2e[ 7.072606] [init] ncm ifname='usb0' dev_addr= host_addr= 02:01:31.869 :1a:c2:57:82:bf 02:01:31.869 3: usb0: mtu 1500 qdisc pfif[ 7.087796] [init] network: usb0 172.16.42.1/24 up (static, no DHCP) 02:01:31.869 o_fast qlen 1000 02:01:31.869 link/ether brd 02:01:31.869 inet 172.16.42.1/24 scope global usb0 02:01:31.869 valid_lft forever preferred_lft forever 02:01:31.869 [init] network: usb0 172.16.42.1/24 up (static, no DHCP) 02:01:31.869 === EMMC-INFO-BEGIN 02:01:31.869 name=H4G2a 02:01:31.869 manfid=0x000090 02:01:31.869 oemid=0x014a 02:01:31.869 cid= 02:01:31.870 date=05/2018 02:01:31.870 serial=0x 02:01:31.870 type=MMC 02:01:31.870 size_512=7634944 logical_block=512 bytes=3909091328 02:01:31.870 major minor #blocks name 02:01:31.870 02:01:31.870 179 0 3817472 mmcblk0 02:01:32.070 179 1 65536 mmcblk0p1 02:01:32.070 179 2 512 mmcblk0p2 02:01:32.070 179 3 512 mmcblk0p3 02:01:32.070 179 4 1024 mmcblk0p4 02:01:32.070 179 5 1024 mmcblk0p5 02:01:32.070 179 6 512 mmcblk0p6 02:01:32.070 179 7 512 mmcblk0p7 02:01:32.070 179 8 1024 mmcblk0p8 02:01:32.070 179 9 512 mmcblk0p9 02:01:32.070 179 10 512 mmcblk0p10 02:01:32.070 179 11 512 mmcblk0p11 02:01:32.070 179 12 1024 mmcblk0p12 02:01:32.070 179 13 1536 mmcblk0p13 02:01:32.070 179 14 1536 mmcblk0p14 02:01:32.070 179 15 1024 mmcblk0p15 02:01:32.070 179 16 1 mmcblk0p16 02:01:32.070 179 17 8 mmcblk0p17 02:01:32.070 179 18 10240 mmcblk0p18 02:01:32.070 179 19 32 mmcblk0p19 02:01:32.070 179 20 1536 mmcblk0p20 02:01:32.070 179 21 16 mmcblk0p21 02:01:32.070 179 22 16384 mmcblk0p22 02:01:32.070 179 23 819200 mmcblk0p23 02:01:32.070 179 24 32768 mmcblk0p24 02:01:32.070 179 25 131072 mmcblk0p25 02:01:32.070 179 26 16384 mmcblk0p26 02:01:32.070 179 27 2603455 mmcblk0p27 02:01:32.070 179 32 4096 mmcblk0boot0 02:01:32.070 179 64 4096 mmcblk0boot1 02:01:32.070 === EMMC-GPT-BEGIN (pN name start_512 size_512 ro) 02:01:32.070 mmcblk0p1 modem 131072 131072 1 02:01:32.070 mmcblk0p10 hyp 272384 1024 1 02:01:32.070 mmcblk0p11 hypbak 273408 1024 1 02:01:32.070 mmcblk0p12 pad 274432 2048 1 02:01:32.070 mmcblk0p13 modemst1 276480 3072 1 02:01:32.070 mmcblk0p14 modemst2 279552 3072 1 02:01:32.070 mmcblk0p15 misc 282624 2048 1 02:01:32.270 mmcblk0p16 fsc 284672 2 1 02:01:32.270 mmcblk0p17 ssd 284674 16 1 02:01:32.270 mmcblk0p18 splash 284690 20480 1 02:01:32.270 mmcblk0p19 DDR 393216 64 1 02:01:32.270 mmcblk0p2 sbl1 262144 1024 1 02:01:32.270 mmcblk0p20 fsg 393280 3072 1 02:01:32.270 mmcblk0p21 sec 396352 32 1 02:01:32.270 mmcblk0p22 boot 396384 32768 1 02:01:32.470 mmcblk0p23 system 429152 1638400 1 02:01:32.470 mmcblk0p24 persist 2067552 65536 1 02:01:32.470 mmcblk0p25 cache 2133088 262144 1 02:01:32.471 mmcblk0p26 recovery 2395232 32768 1 02:01:32.471 mmcblk0p27 userdata 2428000 5206911 1 02:01:32.471 mmcblk0p3 sbl1bak 263168 1024 1 02:01:32.471 mmcblk0p4 aboot 264192 2048 1 02:01:32.471 mmcblk0p5 abootbak 266240 2048 1 02:01:32.471 mmcblk0p6 rpm 268288 1024 1 02:01:32.471 mmcblk0p7 rpmbak 269312 1024 1 02:01:32.671 mmcblk0p8 tz 270336 2048 1 02:01:32.671 mmcblk0p9 tzbak 305184 1024 1 02:01:32.671 === EMMC-GPT-END 02:01:32.671 === EMMC-SHA-BEGIN 02:01:32.671 sbl1 mmcblk0p2 6a661ec947c1d935316f9d8731b5314e7502bde5825ebbfc3d2860d081b4096d 02:01:33.071 rpm mmcblk0p6 5a9b857ba6c3af1c848c6e57bbaf9cefcedc3629e5536d27e87b336c67a281fd 02:01:33.071 0479 02:01:33.671 aboot mmcblk0p4 e4addbf80eb86f6ad8b112e5a3115c7b721bbd2cca8cc109d135aeceb6194482 02:01:33.671 hyp mmcblk0p10 1a963047a4302569da2ddbda726b65c57f5181c0e290ca983dcd2fc529f74555 02:01:34.071 tz mmcblk0p8 8481892fe56fc810e4322b7e6838bf071695e4fc1380c16b21973d7fab325363 02:01:34.272 tzbak mmcblk0p9 c6f7db266a14227ca7e7b0343661089298e4c4320a9522e3e695b5e069e6b4af 02:01:34.272 === EMMC-SHA-END 02:01:34.272 === EMMC-INFO-END 02:01:34.272 B1_OK=1 (MPSS NOT started; run /bin/modem-up when ready) 02:01:34.272 === entering shell (exit restarts it) === 02:01:34.272 02:01:34.472 02:01:34.472 BusyBox v1.37.0 (Debian 1:1.37.0-6+b9) built-in shell (ash) 02:01:34.472 Enter 'help' for a list of built-in commands. 02:01:34.472 02:02:02.680 ~ # /bin/modem-up > /tmp/modem-up.txt 2>&1; echo MODEM-UP-DONE 02:02:02.680 [ 37.822754] remoteproc remoteproc0: powering up 4080000.remoteproc 02:02:02.680 [ 37.823212] remoteproc remoteproc0: Booting fw image mba.mbn, size 234176 02:02:02.680 [ 37.872658] qcom-q6v5-mss 4080000.remoteproc: MBA booted without debug policy, loading mpss 02:02:03.881 [ 38.415448] remoteproc remoteproc0: remor[ 39.021109] wwan wwan0: port wwan0at0 attached 02:02:03.881 [ 39.022656] wwan wwan0: port wwan0at1 attached 02:02:04.081 [ 39.204328] wwan wwan0: port wwan0qmi0 attached 02:02:05.681 (cat /tmp/modem-up.txt; ls /sys/class/net; B=$(ls -d /sys/bus/platform/devices/*bam-dmux*); echo $B; readlink $B/driver; cat $B/power/runtime_status $B/power/control $B/power/autosuspend_delay_ms; dmesg | grep -iE "bam|dmux|wwan") > /tmp/out.txt; nc -l -p 5590 < /tmp/out.txt & 02:02:22.686 MODEM-UP-DONE 02:02:22.686 ~ # (cat /tmp/modem-up.txt; ls /sys/class/net; B=$(ls -d /sys/bus/platform/devic 02:02:22.686 es/*bam-dmux*); echo $B; readlink $B/driver; cat $B/power/runtime_status $B/powe 02:02:22.686 r/control $B/power/autosuspend_delay_ms; dmesg | grep -iE "bam|dmux|wwan") > /tm 02:02:22.686 p/out.txt; nc -l -p 5590 < /tmp/out.txt & 02:02:53.095 ~ # nc -l -p 5591 > /tmp/b4b1.sh & 02:02:53.095 [1]- Done nc -l -p 5590 0 /tmp/out.txt; nc -l -p 5592 < /tmp/out.txt & 02:02:56.296 [2]- Done nc -l -p 5591 1>/tmp/b4b1.sh 02:02:58.097 ~ # sh /tmp/b4b1.sh > /tmp/b4b1-run.txt 2>&1; cat /tmp/b4b1-run.txt 02:04:32.328 /tmp/b4b1.sh: line 27: arithmetic syntax error 02:04:32.328 [1]+ Done nc -l -p 5592 0 /tmp/out.txt; nc -l -p 5593 < /tmp/out.txt & 02:13:53.900 ~ # mv /tmp/b4b1 /tmp/b4b1-attempt1; nc -l -p 5594 > /tmp/b4b1.sh & 02:13:53.900 [1]- Done nc -l -p 5593 0 /tmp/out.txt; nc -l -p 5595 < /tmp/out.txt & 02:13:56.901 [2]- Done nc -l -p 5594 1>/tmp/b4b1.sh 02:13:58.901 ~ # sh /tmp/b4b1.sh > /tmp/b4b1-run.txt 2>&1; cat /tmp/b4b1-run.txt 02:21:22.224 B4B1-DONE 02:21:22.224 [1]+ Done nc -l -p 5595 0 /tmp/out.txt 2>&1; nc -l -p 5597 < /tmp/out.txt 02:24:58.686 & 02:25:02.687 [1]- Done nc -l -p 5596 0 /tmp/b4b2.sh & 02:29:09.168 [2]- Done nc -l -p 5597 0 /tmp/out.txt; nc -l -p 5601 < /tmp/out.txt & 02:29:12.368 [1]- Done nc -l -p 5600 1>/tmp/b4b2.sh 02:29:14.169 ~ # sh /tmp/b4b2.sh > /tmp/b4b2-run.txt 2>&1; cat /tmp/b4b2-run.txt 02:30:26.993 B4B2-STOPPED 02:30:26.993 [2]+ Done nc -l -p 5601 0 /tmp/b4b2-post.sh & 02:40:35.415 [1]- Done nc -l -p 5602 0/tmp/b4b2-post.sh