--- ../../r2/t4/rootfs/init	2026-10-02 14:08:42.105917868 +0600
+++ rootfs/init	2026-10-03 01:03:40.225791442 +0600
@@ -1,6 +1,6 @@
 #!/bin/busybox sh
 # Aurora RAM boot MM1 — QMI1 + ModemManager (qcom-soc) + D-Bus + polkit + eudev.
-# R2/T4: B6P init + telnetd on NCM (RAM test image, never written to flash).
+# R2/T4: B6P init + telnetd on NCM. B8F: + Wi-Fi service autostart (aurora-wifi).
 # B6P: after eMMC RO + /firmware RO + USB NCM, autostarts /etc/init.d/aurora-modem (B6N-proven lifecycle).
 # NEVER mounts, fsck's, formats, trims or writes any mmcblk* device.
 # No block devices, no firmware, no radios. Never exits (failures leave the UART shell).
@@ -128,6 +128,8 @@
 echo "B1_OK=${B1_OK:-0}"
 # B6P: modem autostart only when every eMMC device is RO and the modem FAT is mounted RO (the controller re-checks both).
 if [ "$EMMC_RO_OK" = 1 ] && [ "$B1_OK" = 1 ]; then /etc/init.d/aurora-modem start; else log "B6P: modem autostart SKIPPED (EMMC_RO_OK=${EMMC_RO_OK:-0} B1_OK=${B1_OK:-0})"; fi
+# B8F: Wi-Fi autostart (Pronto + wcn36xx + test AP) under the same RO gates; the service itself waits for modem START OK/FAIL.
+if [ "$EMMC_RO_OK" = 1 ] && [ "$B1_OK" = 1 ]; then /etc/init.d/aurora-wifi start; else log "B8F: wifi autostart SKIPPED"; fi
 echo "=== entering shell (exit restarts it) ==="
 while true; do
 	setsid cttyhack sh