58dcb3d121
- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff): CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp - RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not), B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason - cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation - test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
11 lines
792 B
Bash
11 lines
792 B
Bash
#!/bin/sh
|
|
# B10A 30-min read-only monitor: every 60 s read LBC/USB/BMS registers. Reads only (regmap debugfs), no writes.
|
|
grep -q " /sys/kernel/debug " /proc/mounts || mount -t debugfs debugfs /sys/kernel/debug
|
|
R=/sys/kernel/debug/regmap/0-00/registers
|
|
rd() { dd if=$R bs=9 skip=$(($1)) count=$2 2>/dev/null | cut -d' ' -f2 | tr '\n' ' '; }
|
|
i=0
|
|
while [ $i -lt ${1:-31} ]; do
|
|
echo "M $i up=$(cut -d' ' -f1 /proc/uptime) st1009=$(rd 0x1009 3) rt1010=$(rd 0x1010 1) vdd1040=$(rd 0x1040 1) ibat1044=$(rd 0x1044 1) ctrl1049=$(rd 0x1049 1) usb1308=$(rd 0x1308 2) usbrt1310=$(rd 0x1310 1) batrt1210=$(rd 0x1210 1) fifo=$(rd 0x40c0 10) ocv=$(rd 0x406a 2) bms4008=$(rd 0x4008 2) tcpu=$(cat /sys/class/thermal/thermal_zone4/temp)"
|
|
i=$((i+1)); [ $i -lt ${1:-31} ] && sleep 60
|
|
done
|
|
echo B10A-MON-END
|