uzbek-plus/b9/b9c/cache/emu/F3-no-initrd.out
q 4a7224c41f B9: built-in display (ST7735S SPI) in Linux and persistent B9C cache
- B9A: read-only audit of stock LK/DT: the panel is an ST7735S 128x128 on SPI (BLSP1 QUP4,
  16 MHz, mode 3, D/C GPIO116, RESET GPIO118), backlight = PM8916 MPP4 current sink 40 mA.
- B9B: upstream panel-mipi-dbi with the stock init sequence as firmware; MPP4 sink via pinctrl
  + gpio-backlight; first light with correct colours/orientation/offsets.
- B9C: fbcon (6x8, 21x16) on tty1 + getty, UART console kept, aurora-display service;
  cache B9C b9ce13c9 written and verified, cold boots with LTE + Wi-Fi + display.
- B9L (RAM only): lk2nd second stage with an msm8916 SPI panel port shows a picture before Linux.
- Sanitizer: whitelist for b8/ and b9/.
2026-10-03 01:45:02 +03:00

44 lines
2.5 KiB
Text

[lk] Registering wrapper bio devices...
[lk] block devices:
[lk] | dev | label | size | Leaf |
[lk] | wrp0p26 | userdata | 2542 MiB | Yes |
[lk] | wrp0p25 | recovery | 16 MiB | Yes |
[lk] | wrp0p24 | cache | 128 MiB | Yes |
[lk] | wrp0p23 | persist | 32 MiB | Yes |
[lk] | wrp0p22 | system | 800 MiB | Yes |
[lk] | wrp0p21 | boot | 16 MiB | Yes |
[lk] | wrp0p20 | sec | 16 KiB | Yes |
[lk] | wrp0p19 | fsg | 1 MiB | Yes |
[lk] | wrp0p18 | DDR | 32 KiB | Yes |
[lk] | wrp0p17 | splash | 10 MiB | Yes |
[lk] | wrp0p16 | ssd | 8 KiB | Yes |
[lk] | wrp0p15 | fsc | 1 KiB | Yes |
[lk] | wrp0p14 | misc | 1024 KiB | Yes |
[lk] | wrp0p13 | modemst2 | 1 MiB | Yes |
[lk] | wrp0p12 | modemst1 | 1 MiB | Yes |
[lk] | wrp0p11 | pad | 1024 KiB | Yes |
[lk] | wrp0p10 | hypbak | 512 KiB | Yes |
[lk] | wrp0p9 | hyp | 512 KiB | Yes |
[lk] | wrp0p8 | tzbak | 512 KiB | Yes |
[lk] | wrp0p7 | tz | 1024 KiB | Yes |
[lk] | wrp0p6 | rpmbak | 512 KiB | Yes |
[lk] | wrp0p5 | rpm | 512 KiB | Yes |
[lk] | wrp0p4 | abootbak | 1024 KiB | Yes |
[lk] | wrp0p3 | aboot | 1024 KiB | Yes |
[lk] | wrp0p2 | sbl1bak | 512 KiB | Yes |
[lk] | wrp0p1 | sbl1 | 512 KiB | Yes |
[lk] | wrp0p0 | modem | 64 MiB | Yes |
[lk] | wrp0 | | 3728 MiB | |
[lk] boot: Trying to boot from the file system...
[lk] Initramfs /wrp0p24//initramfs-b9c.cpio.gz does not exist
[lk] Failed to parse extlinux.conf
[lk] boot: Bootable file system not found. Reverting to android boot.
HARNESS: lk2nd_boot() returned -> aboot would continue to boot_linux_from_mmc() (Android boot partition)
HARNESS: scan-candidate wrp0p26 (userdata) ext2 mount rc=-3
HARNESS: scan-candidate wrp0p25 (recovery) ext2 mount rc=-1
HARNESS: scan-candidate wrp0p24 (cache) ext2 mount rc=0
HARNESS: scan-candidate wrp0p23 (persist) ext2 mount rc=-3
HARNESS: scan-candidate wrp0p22 (system) ext2 mount rc=-3
HARNESS: scan-candidate wrp0p21 (boot) ext2 mount rc=-1
HARNESS: scan-candidate wrp0p0 (modem) ext2 mount rc=-1
HARNESS: total bytes read 49664