4a7224c41f
- B9A: read-only audit of stock LK/DT: the panel is an ST7735S 128x128 on SPI (BLSP1 QUP4, 16 MHz, mode 3, D/C GPIO116, RESET GPIO118), backlight = PM8916 MPP4 current sink 40 mA. - B9B: upstream panel-mipi-dbi with the stock init sequence as firmware; MPP4 sink via pinctrl + gpio-backlight; first light with correct colours/orientation/offsets. - B9C: fbcon (6x8, 21x16) on tty1 + getty, UART console kept, aurora-display service; cache B9C b9ce13c9 written and verified, cold boots with LTE + Wi-Fi + display. - B9L (RAM only): lk2nd second stage with an msm8916 SPI panel port shows a picture before Linux. - Sanitizer: whitelist for b8/ and b9/.
15 lines
986 B
Text
15 lines
986 B
Text
21:08:25.167 B9C ram1: waiting for fastboot <EMMC_SERIAL> (power off >= 90 s, then RESET held + battery -> USB)
|
||
21:10:51.321 fastboot present
|
||
Sending 'boot.img' (24964 KB) OKAY [ 0.788s]
|
||
Booting OKAY [ 0.537s]
|
||
Finished. Total time: 1.347s
|
||
rc=0
|
||
21:11:04.685 NCM ping ok
|
||
21:11:04.688 RTC at boot 6 s -> class A
|
||
~ # [6ncat /proc/device-tree/model; echo; uname -r; grep -E "START OK|FAIL in|rollb
|
||
JZ08AU Aurora (RAM boot B9B)
|
||
[79.16] === START OK in 69.2s (wwan0 10.40.174.62/30, routes: 10.10.22.3 194.186.191.1 77.88.8.8 1.1.1.1 )
|
||
21:12:30.772 wifi: [83.49] === AP ENABLED ssid=aurora-b8f ch=6 pid=2798 in 73.51s
|
||
21:12:38.787 sntp: [94.58] SNTP check ( 89.109.251.21 89.109.251.22 89.109.251.23): 14 replies; best offset delay server: +0.200034 0.058931 89.109.251.23: (offset > 0 = clock behind)
|
||
21:13:04.797 snapshot: 2 end markers; RP a204000.remoteproc=running
|
||
21:13:09.819 B9C ram1 END - operator visual check next
|