105bef466a
Sanitized research log, build/reproducibility docs, DTS, kernel configs, patches, initramfs sources, bootchain migration plans and test logs. B5 direct boot PASS; B6 modem lifecycle in progress. No dumps, NV/EFS, vendor firmware or device identifiers included.
63 lines
1.8 KiB
Text
63 lines
1.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Project Aurora — JZ08AU-XPA-7J-R3 (MSM8916, 512 MB, ST7735S SPI panel).
|
|
* RAM-BOOT USB1: kernel + UART console + USB peripheral (NCM gadget). Everything that could touch
|
|
* storage, radios or power management is explicitly disabled.
|
|
*
|
|
* Hardware facts from stock Aurora dtb_01 (see NOTES.md S2.1/S12):
|
|
* console = BLSP1 UART2 serial@78b0000, GPIO4 (TX) / GPIO5 (RX), 115200 8N1.
|
|
* RAM size (memory@80000000 reg) is filled in by lk2nd from SMEM.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "msm8916-pm8916.dtsi" /* + RPM regulators (USB PHY L7/L13) */
|
|
|
|
/ {
|
|
model = "JZ08AU Aurora (RAM boot USB1)";
|
|
compatible = "jz08au,aurora", "qcom,msm8916";
|
|
chassis-type = "embedded";
|
|
|
|
aliases {
|
|
serial0 = &blsp_uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
};
|
|
|
|
&blsp_uart2 {
|
|
pinctrl-0 = <&blsp_uart2_console_default>;
|
|
pinctrl-1 = <&blsp_uart2_console_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
status = "okay";
|
|
};
|
|
|
|
/* --- RAM boot USB1 safety: no storage, no radios --- */
|
|
&sdhc_1 { status = "disabled"; }; /* eMMC: must stay untouched */
|
|
&sdhc_2 { status = "disabled"; };
|
|
/* usb: see peripheral block below */
|
|
&mpss { status = "disabled"; };
|
|
&bam_dmux { status = "disabled"; };
|
|
&bam_dmux_dma { status = "disabled"; };
|
|
&wcnss { status = "disabled"; }; /* WCNSS/pronto remoteproc */
|
|
|
|
/*
|
|
* USB peripheral only (ChipIdea ci-hdrc + qcom,usb-hs-phy-msm8916, upstream bindings).
|
|
* Stock Aurora: HSUSB_1p8 = L7 1.8 V, HSUSB_3p3 = L13 3.075 V, otg-control = 2 (PMIC VBUS detect),
|
|
* PHY init-seq identical to upstream. VBUS detect via PM8916 USB_IN (as on JZ02). No host, no role switch.
|
|
*/
|
|
&pm8916_usbin {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
dr_mode = "peripheral";
|
|
extcon = <&pm8916_usbin>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_hs_phy {
|
|
extcon = <&pm8916_usbin>;
|
|
};
|