uzbek-plus/logs/b6/all/aurora-modem.d/diag-1651.81.txt
q 105bef466a Project Aurora: mainline ARM64 Linux on JZ08AU (MSM8916) LTE modem
Sanitized research log, build/reproducibility docs, DTS, kernel configs,
patches, initramfs sources, bootchain migration plans and test logs.
B5 direct boot PASS; B6 modem lifecycle in progress.
No dumps, NV/EFS, vendor firmware or device identifiers included.
2026-09-30 17:23:18 +03:00

139 lines
7.6 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

### diag 1651.81 state=MM_READY mss=running rmtfs=4194 mm=4474 bam=suspended
/org/freedesktop/ModemManager1/Modem/0 [QUALCOMM INCORPORATED] 0
----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/0
| device id: 7eea3e62ab14a18d5de1cf97053b7b043d75d6db
----------------------------------
Hardware | manufacturer: QUALCOMM INCORPORATED
| model: 0
| firmware revision: MPSS.DPM.1.0.c7-00193-M8916EAAAANVZM-1 1 [Sep 09 2015 10:00:00]
| h/w revision: 10000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: <IMEI>
----------------------------------
System | device: qcom-soc
| physdev: /sys/devices/platform/soc@0/4080000.remoteproc/4080000.remoteproc:bam-dmux
| drivers: bam-dmux, qcom-q6v5-mss, rpmsg_ctrl
| plugin: qcom-soc
| primary port: wwan0qmi0
| ports: wwan0 (net), wwan0at0 (at), wwan0at1 (at), wwan0qmi0 (qmi),
| wwan1 (net), wwan2 (net), wwan3 (net), wwan4 (net), wwan5 (net),
| wwan6 (net), wwan7 (net)
| ignored ports: rpmsg_ctrl1 (unknown)
----------------------------------
Status | lock: sim-pin2
| unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (1), sim-puk2 (10)
| state: connected
| power state: on
| access tech: lte
| signal quality: 67% (recent)
----------------------------------
Modes | supported: allowed: 2g; preferred: none
| allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 2g, 3g; preferred: 3g
| allowed: 2g, 3g; preferred: 2g
| allowed: 2g, 4g; preferred: 4g
| allowed: 2g, 4g; preferred: 2g
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| allowed: 2g, 3g, 4g; preferred: 4g
| allowed: 2g, 3g, 4g; preferred: 3g
| allowed: 2g, 3g, 4g; preferred: 2g
| current: allowed: 4g; preferred: none
----------------------------------
Bands | supported: egsm, dcs, pcs, g850, utran-1, utran-3, utran-5, utran-8,
| utran-2, eutran-1, eutran-2, eutran-3, eutran-5, eutran-7, eutran-8,
| eutran-20, eutran-39, eutran-40
| current: egsm, dcs, utran-1, utran-5, utran-8, eutran-1, eutran-3,
| eutran-5, eutran-7, eutran-8, eutran-20, eutran-40
----------------------------------
IP | supported: ipv4, ipv6, ipv4v6
----------------------------------
3GPP | imei: <IMEI>
| enabled locks: fixed-dialing
| operator id: 25099
| operator name: Beeline
| registration: home
| packet service state: attached
----------------------------------
3GPP EPS | ue mode of operation: ps-2
| initial bearer path: /org/freedesktop/ModemManager1/Bearer/0
| initial bearer ip type: ipv4v6
----------------------------------
SIM | primary sim path: /org/freedesktop/ModemManager1/SIM/0
----------------------------------
Bearer | paths: /org/freedesktop/ModemManager1/Bearer/1
[/dev/wwan0qmi0] Operating mode retrieved:
Mode: 'online'
HW restricted: 'no'
[/dev/wwan0qmi0] Successfully got serving system:
Registration state: 'registered'
CS: 'detached'
PS: 'attached'
Selected network: '3gpp'
Radio interfaces: '1'
[0]: 'lte'
Roaming status: 'off'
Data service capabilities: '1'
[0]: 'lte'
Current PLMN:
MCC: '250'
MNC: '99'
Description: 'Beeline'
Roaming indicators: '1'
[0]: 'off' (lte)
3GPP location area code: '<CELL>'
3GPP cell ID: '<CELL>'
Detailed status:
Status: 'available'
Capability: 'ps'
HDR Status: 'none'
HDR Hybrid: 'no'
Forbidden: 'no'
LTE tracking area code: '<CELL>'
Full operator code info:
MCC: '250'
MNC: '99'
MNC with PCS digit: 'no'
[ 1546.723975] [b6] CYCLE 1 RESULT FAIL: start data stop (bam=suspended emmc=0/0 chan-already-open=0 dmesg-errs=0)
[ 1546.727270] [b6] STOPPING after failed cycle 1
[ 1546.833864] [b6] B6-RUN-END
[ 1589.082642] [b6] CYCLE 1 begin: w=0 s=0 mss=offline
[ 1589.100512] [aurora-modem] === START (conf /tmp/aurora-modem.conf, apn 'internet.beeline.ru', ip-type ipv4)
[ 1589.161752] remoteproc remoteproc0: powering up 4080000.remoteproc
[ 1589.162192] remoteproc remoteproc0: Booting fw image mba.mbn, size 234176
[ 1589.173022] [aurora-modem] STATE OFF -> RMTFS_READY
[ 1589.178254] [aurora-modem] STATE RMTFS_READY -> MPSS_BOOTING
[ 1589.212540] qcom-q6v5-mss 4080000.remoteproc: MBA booted without debug policy, loading mpss
[ 1589.757345] remoteproc remoteproc0: remote processor 4080000.remoteproc is now up
[ 1589.846712] [aurora-modem] MSS running after 0.7s
[ 1589.852709] [aurora-modem] STATE MPSS_BOOTING -> MPSS_RUNNING
[ 1590.324249] wwan wwan0: port wwan0at0 attached
[ 1590.327678] wwan wwan0: port wwan0at1 attached
[ 1590.501913] bam-dmux 4080000.remoteproc:bam-dmux: Channel already open: 0
[ 1590.501973] bam-dmux 4080000.remoteproc:bam-dmux: Channel already open: 1
[ 1590.507846] bam-dmux 4080000.remoteproc:bam-dmux: Channel already open: 2
[ 1590.514538] bam-dmux 4080000.remoteproc:bam-dmux: Channel already open: 3
[ 1590.521259] bam-dmux 4080000.remoteproc:bam-dmux: Channel already open: 4
[ 1590.528024] bam-dmux 4080000.remoteproc:bam-dmux: Channel already open: 5
[ 1590.534806] bam-dmux 4080000.remoteproc:bam-dmux: Channel already open: 6
[ 1590.541565] bam-dmux 4080000.remoteproc:bam-dmux: Channel already open: 7
[ 1590.548907] wwan wwan0: port wwan0qmi0 attached
[ 1590.698758] [aurora-modem] wwan0qmi0 + wwan0 present after 0.8s; +2 s (JZ02 rpmsg_wwan_ctrl port-race guard, proven start_post)
[ 1592.881169] [aurora-modem] STATE MPSS_RUNNING -> QMI_READY
[ 1592.891836] [aurora-modem] DMS Mode: 'shutting-down' after 0.2s
[ 1592.944445] [aurora-modem] STATE QMI_READY -> SIM_READY
[ 1592.952865] [aurora-modem] UIM card present, USIM app ready after 0.1s
[ 1592.958954] [aurora-modem] SET: qmicli -p -d /dev/wwan0qmi0 --dms-set-operating-mode=online (retried only on DeviceNotReady, <= 30s)
[ 1596.200411] [aurora-modem] DMS online after 3.2s
[ 1596.205831] [aurora-modem] STATE SIM_READY -> RADIO_ONLINE
[ 1602.400979] [aurora-modem] registered: MCC: '250' MNC: '99' Description: 'Beeline' MCC: '250' MNC: '99' after 6.2s
[ 1602.406386] [aurora-modem] STATE RADIO_ONLINE -> REGISTERED
[ 1602.501306] [aurora-modem] ModemManager started pid 4474 (log mm-1.log)
[ 1640.777033] [aurora-modem] MM modem 0 detected after 38.3s
[ 1640.880083] [aurora-modem] STATE REGISTERED -> MM_READY
[ 1641.083922] [aurora-modem] MM state disabled after 0.2s
[ 1641.202187] [aurora-modem] mmcli -m 0 --simple-connect="apn=internet.beeline.ru,user=beeline,password=***,allowed-auth=pap,ip-type=ipv4"
[ 1651.951288] [aurora-modem] FAIL in MM_READY: no connected bearer after simple-connect