4a7224c41f
- B9A: read-only audit of stock LK/DT: the panel is an ST7735S 128x128 on SPI (BLSP1 QUP4, 16 MHz, mode 3, D/C GPIO116, RESET GPIO118), backlight = PM8916 MPP4 current sink 40 mA. - B9B: upstream panel-mipi-dbi with the stock init sequence as firmware; MPP4 sink via pinctrl + gpio-backlight; first light with correct colours/orientation/offsets. - B9C: fbcon (6x8, 21x16) on tty1 + getty, UART console kept, aurora-display service; cache B9C b9ce13c9 written and verified, cold boots with LTE + Wi-Fi + display. - B9L (RAM only): lk2nd second stage with an msm8916 SPI panel port shows a picture before Linux. - Sanitizer: whitelist for b8/ and b9/.
13 lines
693 B
Text
13 lines
693 B
Text
20:54:54.067 B9B ram1: waiting for fastboot <EMMC_SERIAL> (power off >= 90 s, then RESET held + battery -> USB)
|
||
20:57:44.431 fastboot present
|
||
Sending 'boot.img' (24948 KB) OKAY [ 0.787s]
|
||
Booting OKAY [ 0.542s]
|
||
Finished. Total time: 1.350s
|
||
rc=0
|
||
20:57:55.799 NCM ping ok
|
||
~ # [6ncat /proc/device-tree/model; echo; uname -r; grep -E "START OK|FAIL in|rollb
|
||
JZ08AU Aurora (RAM boot B9B)
|
||
7.2.7-aurora-b9b
|
||
[71.69] === START OK in 62.3s (wwan0 10.45.150.163/29, routes: 10.10.22.3 194.186.191.1 77.88.8.8 1.1.1.1 )
|
||
20:59:21.884 wifi: [75.52] === AP ENABLED ssid=aurora-b8f ch=6 pid=2537 in 66.16s
|
||
20:59:34.893 state saved (116 lines)
|