uzbek-plus/b10/b10a/b10a-death-uart-tail.txt
q 58dcb3d121 B10: battery charging — PM8916 LBC supervisor v4 (CHARGE/HOLD, FAULT safe clamp to 4.00 V) and persistent B10B-5 cache
- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff):
  CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp
- RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not),
  B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason
- cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation
- test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
2026-10-04 19:00:27 +03:00

110 lines
No EOL
3.8 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

]: <dbg> [1790984252.769311] [modem0] RSSI: -73 dBm --> 65%
[1902]: <dbg> [1790984252.770059] [modem0] signal quality updated (65)
[1902]: <dbg> [1790984252.770580] [modem0] skipping extended signal information update...
[1902]: <dbg> [1790984264.324814] [/dev/wwan0qmi0] sent message...
<<<<<< RAW:
<<<<<< length = 20
<<<<<< data = <qmi-hex-redacted>
[1902]: <dbg> [1790984264.325828] [/dev/wwan0qmi0] sent generic request (translated)...
<<<<<< QMUX:
<<<<<< length = 19
<<<<<< flags = 0x00
<<<<<< service = "wds"
<<<<<< client = 2
<<<<<< QMI:
<<<<<< flags = "none"
<<<<<< transaction = 76
<<<<<< tlv_length = 7
<<<<<< message = "Get Packet Statistics" (0x0024)
<<<<<< TLV:
<<<<<< type = "Mask" (0x01)
<<<<<< length = 4
<<<<<< value = C0:00:00:00
<<<<<< translated = tx-bytes-ok, rx-bytes-ok
[1902]: <dbg> [1790984264.331320] [/dev/wwan0qmi0] received message...
<<<<<< RAW:
<<<<<< length = 42
<<<<<< data = <qmi-hex-redacted>
[1902]: <dbg> [1790984264.332555] [/dev/wwan0qmi0] received generic response (translated)...
<<<<<< QMUX:
<<<<<< length = 41
<<<<<< flags = 0x80
<<<<<< service = "wds"
<<<<<< client = 2
<<<<<< QMI:
<<<<<< flags = "response"
<<<<<< transaction = 76
<<<<<< tlv_length = 29
<<<<<< message = "Get Packet Statistics" (0x0024)
<<<<<< TLV:
<<<<<< type = "Result" (0x02)
<<<<<< length = 4
<<<<<< value = 00:00:00:00
<<<<<< translated = SUCCESS
<<<<<< TLV:
<<<<<< type = "Rx Bytes Ok" (0x1a)
<<<<<< length = 8
<<<<<< value = <qmi-hex-redacted>
<<<<<< translated = 2062
<<<<<< TLV:
<<<<<< type = "Tx Bytes Ok" (0x19)
<<<<<< length = 8
<<<<<< value = <qmi-hex-redacted>
<<<<<< translated = 1772
[1902]: <dbg> [1790984268.123143] [/dev/wwan0qmi0] received message...
<<<<<< RAW:
<<<<<< length = 22
<<<<<< data = <qmi-hex-redacted>
[1902]: <dbg> [1790984268.124163] [/dev/wwan0qmi0] received generic indication (translated)...
<<<<<< QMUX:
<<<<<< length = 21
<<<<<< flags = 0x80
<<<<<< service = "nas"
<<<<<< client = 1
<<<<<< QMI:
<<<<<< flags = "indication"
<<<<<< transaction = 107
<<<<<< tlv_length = 9
<<<<<< message = "Signal Info" (0x0051)
<<<<<< TLV:
<<<<<< type = "LTE Signal Strength" (0x14)
<<<<<< length = 6
<<<<<< value = <qmi-hex-redacted>
<<<<<< translated = [ rssi = '-68' rsrq = '-12' rsrp = '-96' snr = '18' ]
[1902]: <dbg> [1790984268.128639] [modem0] RSSI (LTE): -68 dBm
[1902]: <dbg> [1790984268.129088] [modem0] RSSI: -68 dBm --> 73%
[1902]: <dbg> [1790984268.129841] [modem0] signal quality updated (73)
[1902]: <dbg> [1790984268.130362] [modem0] skipping extended signal information update...
[1902]: <dbg> [1790984270.682898] [/dev/wwan0qmi0] received message...
<<<<<< RAW:
<<<<<< length = 22
<<<<<< data = <qmi-hex-redacted>
[1902]: <dbg> [1790984270.683916] [/dev/wwan0qmi0] received generic indication (translated)...
<<<<<< QMUX:
<<<<<< length = 21
<<<<<< flags = 0x80
<<<<<< service = "nas"
<<<<<< client = 1
<<<<<< QMI:
<<<<<< flags = "indication"
<<<<<< transaction = 108
<<<<<< tlv_length = 9
<<<<<< message = "Signal Info" (0x0051)
<<<<<< TLV:
<<<<<< type = "LTE Signal Strength" (0x14)
<<<<<< length = 6
<<<<<< value = <qmi-hex-redacted>
<<<<<< translated = [ rssi = '-72' rsrq = '-9' rsrp = '-97' snr = '84' ]
[1902]: <dbg> [1790984270.688601] [modem0] RSSI (LTE): -72 dBm
[1902]: <dbg> [1790984270.689055] [modem0] RSSI: -72 dBm --> 67%
[1902]: <dbg> [1790984270.689800] [modem0] signal quality updated (67)
[1902]: <dbg> [1790984270.690326] [modem0] skipping extended signal information update...
[1902]: <dbg> [1790984291.163062] [/dev/wwan0qmi0] receiv