58dcb3d121
- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff): CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp - RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not), B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason - cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation - test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
13 lines
666 B
Bash
13 lines
666 B
Bash
#!/bin/sh
|
|
# B10B-0 read-only full dump of PM8916 SID0: every 0x100 peripheral block whose TYPE (offset 0x04) is non-zero. Reads only.
|
|
grep -q " /sys/kernel/debug " /proc/mounts || mount -t debugfs debugfs /sys/kernel/debug
|
|
R=/sys/kernel/debug/regmap/0-00/registers
|
|
echo "== DUMP-START up=$(cut -d' ' -f1 /proc/uptime) $(uname -r) emmc=$(awk '{print "w="$5}' /sys/block/mmcblk0/stat)"
|
|
b=1
|
|
while [ $b -lt 256 ]; do
|
|
a=$((b * 256))
|
|
t=$(dd if=$R bs=9 skip=$((a + 4)) count=1 2>/dev/null | cut -d' ' -f2)
|
|
if [ -n "$t" ] && [ "$t" != "00" ]; then dd if=$R bs=9 skip=$a count=256 2>/dev/null; fi
|
|
b=$((b + 1))
|
|
done
|
|
echo "== DUMP-END up=$(cut -d' ' -f1 /proc/uptime)"
|