58dcb3d121
- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff): CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp - RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not), B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason - cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation - test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
34 lines
2.3 KiB
Text
34 lines
2.3 KiB
Text
12:45:36.733 mon-start b4r1: waiting for lk1st fastboot (RESET-held reboot), then for the new boot
|
|
12:51:24.427 pre-boot operator: USB 0.21 A (candidate RAM image, CHARGING/CV); RESET held
|
|
12:51:29.429 telnet reboot sent
|
|
12:51:41.978 fastboot seen
|
|
12:51:41.979 fastboot +9s
|
|
12:51:44.995 fastboot gone (booting)
|
|
12:51:55.510 NCM up
|
|
|
|
|
|
|
|
DD2=02 setsid sh /tmp/b10b3-mon.sh 30 > /dev/null 2>&1 < /dev/null & sleep 1; dm
|
|
esg | grep -E "safety timer|supervisor"; cut -d" " -f1 /proc/uptime
|
|
1d2621aa3195fd3c78fd30f90da44639 /tmp/b10b3-mon.sh
|
|
[ 0.918771] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: safety timer 512 min (TCHG_MAX 0x7f), enabled
|
|
[ 0.930816] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: supervisor v3: charge 4200000 uV, hold 4050000 uV, full-min 4150000 uV, cv 60 min, IBAT_MAX code 4, ovp 4250000 uV
|
|
[ 0.972147] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: supervisor INIT -> CHARGING (probe, usb present), vbat 4097019 uV
|
|
16.45
|
|
[1]+ Done setsid sh /tmp/b10b3-mon.sh 30 1>/dev/null 2>&1 0</dev/null
|
|
12:52:03.549 local md5 1d2621aa3195fd3c78fd30f90da44639 -
|
|
12:52:03.550 monitor started (30 s), pull started -> logs/b10/b10b3/b4r1-mon.txt
|
|
12:56:28 B10B-4 precondition discharge armed: 4x yes after USB off, stop VADC<=3.995 V x3 (loaded; rest target ~4.05 V) / PMIC>55C / 90 min; heartbeat HB b4dis
|
|
12:57:31 operator: USB OFF; before USB 0.23 A, DMM 4.175 V; after unplug (load on) DMM 4.081 V
|
|
12:58:28 operator: DMM 4.062 V under load
|
|
13:26:02 operator: DMM 3.993 V under load
|
|
13:27:19 operator: DMM 4.036 V at rest (load stopped by script)
|
|
13:28:29 operator: USB ON; DMM 4.096 V, USB 0.471 A
|
|
13:41:16 TEST1 susp 1 start
|
|
13:44:19 TEST1 operator meter: 0.46 A before, 0.41 A after susp 1; display worked. Now susp 0
|
|
13:46:03 TEST1 restore OK (susp 0 -> FAST immediately). TEST2 vdd 0 start
|
|
13:49:39 TEST2 operator meter: 0.000 A at +5 s and +60 s after vdd 0. Now vdd 8
|
|
13:51:52 TEST2 restore: vdd 8 -> charging resumed (path 01, no FAST). Operator USB replug for FAST baseline; meter 0.41 A
|
|
13:54:24 FAST baseline restored by USB replug (NO_USB 3663.5, CHARGING 3720.5), meter 0.41 A. TEST3 ibat 0 start
|
|
13:57:18 TEST3 operator meter: reported "0.8a" at +5 s and +60 s (to confirm: likely 0.08 A; baseline 0.41 A). Now ibat 4
|
|
13:59:09 B10B-4 tests END: baseline restored (FAST, production regs); Test 4 not needed (Test 2 sufficient)
|