58dcb3d121
- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff): CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp - RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not), B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason - cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation - test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
29 lines
1 KiB
Text
29 lines
1 KiB
Text
|
|
|
|
|
|
debug " /proc/mounts || mount -t debugfs debugfs /sys/kernel/debug; cat /sys/ker
|
|
nel/debug/pm8916_lbc/state; cat /sys/bus/iio/devices/iio:device0/in_voltage6_inp
|
|
ut /sys/bus/iio/devices/iio:device0/in_temp8_input; cut -d" " -f5 /sys/block/mmc
|
|
blk0/stat
|
|
[ 0.924640] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: safety timer 512 min (TCHG_MAX 0x7f), enabled
|
|
[ 0.928265] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: supervisor v3: charge 4100000 uV, hold 4000000 uV, full-min 4050000 uV, cv 5 min, IBAT_MAX code 4, ovp 4250000 uV
|
|
[ 0.959737] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: supervisor INIT -> CHARGING (probe, usb present), vbat 3955479 uV
|
|
state CHARGING fault none vbat_uv 4060527
|
|
charge_uv 4100000 hold_uv 4000000 full_min_uv 4050000 cv_hold_min 5 cv_s -1 nocv 10 timeout_min 512
|
|
n_insert 1 n_hold 0 n_latch 0
|
|
CHG_STATUS 05
|
|
CHGR_RT 01
|
|
CHG_CTRL a0
|
|
CHG_FAILED 00
|
|
VDD_MAX 04
|
|
IBAT_MAX 04
|
|
TCHG_MAX_EN 80
|
|
TCHG_MAX 7f
|
|
USB_PATH 01
|
|
USB_RT 03
|
|
BAT_RT 03
|
|
BOOT_DONE 80
|
|
log 0 t=0 INIT->CHARGING vbat=3955479 probe, usb present
|
|
4061391
|
|
46228
|
|
1120
|