58dcb3d121
- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff): CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp - RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not), B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason - cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation - test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
18 lines
1.7 KiB
Text
18 lines
1.7 KiB
Text
11:13:56.270 pre: save production-run logs
|
|
11:14:08.323 pre state:
|
|
7.2.7-aurora-b10b3 JZ08AU Aurora (RAM boot B10B-3 production test) 34935.87 [ 0.752536] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T00:00:05 UTC (5) 34940 0808: 10 0809: 00 080a: 00 080b: 00 080c: 00 080d: 80 088f: 00 1009: 05 1010: 21 1040: 08 1041: 08 1044: 04 1045: 04 1049: a0 104a: 00 105b: 09 1060: 80 1061: 7f 10ee: 00 1308: 02 1642: 80
|
|
11:14:16.346 board sha: 0428be0c18138ed092b0bd497f75210b4471d0fdb55d8cf2730b39af0ceeff89
|
|
11:14:16.347 running /tmp/rbl (no RESET)
|
|
11:21:05.206 fastboot reached without RESET (UART: lk1st fastboot_init at 14:14:18.658); script hung on the dead telnet session, continued manually
|
|
Sending 'boot.img' (24964 KB) rc=143
|
|
11:32:39.761 no NCM
|
|
11:32:48 fastboot boot after software reboot STALLED (lk: download:01861000, no data; after kill: fastboot: oops!; getvar timeout). Board stuck in lk1st fastboot on battery. Asked operator to replug USB.
|
|
11:45:24 operator replugged USB (host dmesg: device 23 re-enumerated)
|
|
11:45:36.275 getvar OK after replug
|
|
Sending 'boot.img' (24964 KB) OKAY [ 0.819s]
|
|
Booting OKAY [ 0.538s]
|
|
Finished. Total time: 1.379s
|
|
rc=0
|
|
11:45:47.674 NCM up (B9C RAM)
|
|
11:45:56.684 post state:
|
|
7.2.7-aurora-b9c JZ08AU Aurora (RAM boot B9B) 13.26 [ 0.748247] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T10:13:56 UTC (36836) 36848 0808: 11 0809: 00 080a: 00 080b: 00 080c: 02 080d: 00 088f: 00 1009: 05 1010: 21 1040: 08 1041: 08 1044: 00 1045: 0a 1049: 90 104a: 00 105b: 09 1060: 80 1061: 1d 10ee: 00 1308: 02 1642: 80
|