- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff): CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp - RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not), B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason - cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation - test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
16 lines
731 B
Text
16 lines
731 B
Text
14:35:30 A/B: no EOC after ~65 min CV at 4.00 V; Wi-Fi AP OFF only (aurora-wifi stop), everything else unchanged
|
|
|
|
|
|
|
|
v; ps | grep [h]ostapd || echo no-hostapd
|
|
[5806.13] === WIFI STOP (hostapd=2917, WCNSS offline)
|
|
service: idle
|
|
remoteproc: a204000.remoteproc offline (/sys/class/remoteproc/remoteproc1)
|
|
crash=0 watchdog=0 fatal=0
|
|
wlan0:
|
|
hostapd: pid= 0 connects, 0 disconnects
|
|
[86.40] wlan0 up addr=<MAC> (wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vUnknown with 19.2MHz XO')
|
|
[87.45] === AP ENABLED ssid=aurora-b8f ch=6 pid=2917 in 77.33s
|
|
[5806.13] === WIFI STOP (hostapd=2917, WCNSS offline)
|
|
no-hostapd
|
|
14:53:20 STOP B10B-3T t1: no EOC after ~80 min CV at 4.00 V (Wi-Fi off last 15 min); final state saved; monitor stopped
|