58dcb3d121
- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff): CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp - RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not), B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason - cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation - test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
20 lines
1.2 KiB
Text
20 lines
1.2 KiB
Text
20:36:20.912 mon-start t2: waiting for the board to go away (warm reboot)
|
|
20:38:30.976 pre-boot operator: DMM 3.988 V, USB meter 0.403 A (B9C SBL charge); RESET held
|
|
20:38:35.978 telnet reboot sent
|
|
20:38:49.615 board gone
|
|
20:38:51.375 fastboot +12s
|
|
20:39:03.135 NCM up
|
|
|
|
|
|
|
|
DD2=00 setsid sh /tmp/b10b3-mon.sh 5 > /dev/null 2>&1 < /dev/null & sleep 1; dme
|
|
sg | grep -E "safety timer|supervisor"; cut -d" " -f1 /proc/uptime
|
|
1d2621aa3195fd3c78fd30f90da44639 /tmp/b10b3-mon.sh
|
|
[ 0.929629] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: safety timer 512 min (TCHG_MAX 0x7f), enabled
|
|
[ 0.933468] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: recharge supervisor: threshold 3940000 uV, 3 x 30000 ms below, ovp 4250000 uV
|
|
[ 0.963386] pm8916-lbc 200f000.spmi:pmic@0:charger@1000: supervisor INIT -> CHARGING (probe, usb present), vbat 3896340 uV
|
|
16.58
|
|
[1]+ Done setsid sh /tmp/b10b3-mon.sh 5 1>/dev/null 2>&1 0</dev/null
|
|
20:39:11.173 local md5 1d2621aa3195fd3c78fd30f90da44639 -
|
|
20:39:11.174 monitor started (5 s), pull started -> logs/b10/b10b3/t2-mon.txt
|
|
20:45:33 t1-diagnostic END: FAST_CHG_ON + path 02 from first sample, 62/62 samples over 5 min; monitor stopped, end dump taken; board left CHARGING on the B10B-3T v2 RAM image (VDD 4.00 V, 512 min)
|