uzbek-plus/logs/b4a/b4a-final.txt
q 105bef466a Project Aurora: mainline ARM64 Linux on JZ08AU (MSM8916) LTE modem
Sanitized research log, build/reproducibility docs, DTS, kernel configs,
patches, initramfs sources, bootchain migration plans and test logs.
B5 direct boot PASS; B6 modem lifecycle in progress.
No dumps, NV/EFS, vendor firmware or device identifiers included.
2026-09-30 17:23:18 +03:00

144 lines
3.6 KiB
Text

### 1316.78 --dms-get-operating-mode
[/dev/wwan0qmi0] Operating mode retrieved:
Mode: 'online'
HW restricted: 'no'
### rc=0
### 1316.81 --uim-get-card-status
[/dev/wwan0qmi0] Successfully got card status
Provisioning applications:
Primary GW: slot '1', application '1'
Primary 1X: session doesn't exist
Secondary GW: session doesn't exist
Secondary 1X: session doesn't exist
Slot [1]:
Card state: 'present'
UPIN state: 'not-initialized'
UPIN retries: '0'
UPUK retries: '0'
Application [1]:
Application type: 'usim (2)'
Application state: 'ready'
Application ID:
A0:00:00:00:87:10:02:FF:47:F0:01:89:00:00:01:FF
Personalization state: 'ready'
UPIN replaces PIN1: 'no'
PIN1 state: 'disabled'
PIN1 retries: '3'
PUK1 retries: '10'
PIN2 state: 'enabled-not-verified'
PIN2 retries: '3'
PUK2 retries: '10'
Slot [2]:
Card state: 'error: no-atr-received (3)'
UPIN state: 'not-initialized'
UPIN retries: '0'
UPUK retries: '0'
### rc=0
### 1316.85 --nas-get-home-network
[/dev/wwan0qmi0] Successfully got home network:
Home network:
MCC: '250'
MNC: '20'
Description: 'TELE2 RU'
### rc=0
### 1316.89 --nas-get-rf-band-info
[/dev/wwan0qmi0] Successfully got RF band info
Band Information:
Radio Interface: 'lte'
Active Band Class: 'eutran-1'
Active Channel: '100'
### rc=0
### 1316.93 --nas-get-cell-location-info
[/dev/wwan0qmi0] Successfully got cell location info
Intrafrequency LTE Info
UE In Idle: 'yes'
PLMN: '25020'
Tracking Area Code: '<CELL>'
Global Cell ID: '<CELL>'
EUTRA Absolute RF Channel Number: '100' (E-UTRA band 1: 2100)
Serving Cell ID: '<CELL>'
Cell Reselection Priority: '5'
S Non Intra Search Threshold: '16'
Serving Cell Low Threshold: '6'
S Intra Search Threshold: '62'
Cell [0]:
Physical Cell ID: '<CELL>'
RSRQ: '-7.5' dB
RSRP: '-90.0' dBm
RSSI: '-65.4' dBm
Cell Selection RX Level: '34'
Cell [1]:
Physical Cell ID: '<CELL>'
RSRQ: '-13.1' dB
RSRP: '-99.2' dBm
RSSI: '-77.2' dBm
Cell Selection RX Level: '24'
Interfrequency LTE Info
UE In Idle: 'yes'
Frequency [0]:
EUTRA Absolute RF Channel Number: '1564' (E-UTRA band 3: 1800+)
Selection RX Level Low Threshold: '0'
Cell Selection RX Level High Threshold: '14'
Cell Reselection Priority: '4'
Cell [0]:
Physical Cell ID: '<CELL>'
RSRQ: '-7.9' dB
RSRP: '-87.5' dBm
RSSI: '-62.6' dBm
Cell Selection RX Level: '0'
Cell [1]:
Physical Cell ID: '<CELL>'
RSRQ: '-14.9' dB
RSRP: '-99.4' dBm
RSSI: '-75.5' dBm
Cell Selection RX Level: '0'
Frequency [1]:
EUTRA Absolute RF Channel Number: '39352' (E-UTRA band 40: TD 2300)
Selection RX Level Low Threshold: '0'
Cell Selection RX Level High Threshold: '16'
Cell Reselection Priority: '7'
LTE Info Neighboring GSM
UE In Idle: 'yes'
LTE Info Neighboring WCDMA
UE In Idle: 'yes'
LTE Timing Advance: 'unavailable'
### rc=0
### 1316.96 --nas-get-serving-system
[/dev/wwan0qmi0] Successfully got serving system:
Registration state: 'registered'
CS: 'detached'
PS: 'attached'
Selected network: '3gpp'
Radio interfaces: '1'
[0]: 'lte'
Roaming status: 'off'
Data service capabilities: '1'
[0]: 'lte'
Current PLMN:
MCC: '250'
MNC: '20'
Description: 't2'
Roaming indicators: '1'
[0]: 'off' (lte)
3GPP location area code: '<CELL>'
3GPP cell ID: '<CELL>'
Detailed status:
Status: 'available'
Capability: 'ps'
HDR Status: 'none'
HDR Hybrid: 'no'
Forbidden: 'no'
LTE tracking area code: '<CELL>'
Full operator code info:
MCC: '250'
MNC: '20'
MNC with PCS digit: 'no'
### rc=0
### 1317.00 --nas-get-signal-info
[/dev/wwan0qmi0] Successfully got signal info
LTE:
RSSI: '-65 dBm'
RSRQ: '-9 dB'
RSRP: '-87 dBm'
SNR: '17.0 dB'
### rc=0