q/uzbek-plus
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
uzbek-plus/logs/uart/bam1-20260930-020119.log
q 105bef466a Project Aurora: mainline ARM64 Linux on JZ08AU (MSM8916) LTE modem 
Sanitized research log, build/reproducibility docs, DTS, kernel configs,
patches, initramfs sources, bootchain migration plans and test logs.
B5 direct boot PASS; B6 modem lifecycle in progress.
No dumps, NV/EFS, vendor firmware or device identifiers included.
2026-09-30 17:23:18 +03:00

453 lines
31 KiB
Text
Raw Blame History

### uartlog start 2026-09-30T02:01:19.061000 /dev/ttyUSB0 115200 8N1
02:01:21.061
02:01:21.261 [2]+ Done nc -l -p 5583 0</tmp/out.txt
02:01:21.261 ~ # reboot -f
02:01:21.661 [ 1812.614\xff
02:01:21.661 Format: Log Type - Time(microsec) - Message
02:01:21.661 Log type: B - since boot(excluding boot rom). D - delta
02:01:21.661 B - 156709 - SBL1, Start
02:01:21.661 B - 165523 - pm_device_init, Start
02:01:21.661 D - 11712 - pm_device_init, Delta
02:01:21.661 B - 177266 - boot_flash_init, Start
02:01:21.661 D - 30 - boot_flash_+\x8b=D - 23210 - boot_config_data_table_init, Delta
02:01:21.661 B - 209199 - sbl1_ddr_set_params, Start
02:01:21.661 B - 211090 - Pre_DDR_clock_init, Start
02:01:21.662 D - 183 - Pre_DDR_clock_init, Delta
02:01:21.662 D - 0 - sbl1_ddr_set_params, Delta
02:01:21.662 B - 230061 - pm_driver_init, Start
02:01:21.662 B - 237442 - batt_voltage=4198
02:01:21.662 D - 7564 - pm_driver_init, Delta
02:01:21.662 B - 237656 - clock_init, Start
02:01:21.662 D - 30 - clock_init, Delta
02:01:21.662 B - \xb2LM\xbaj\x8a\x9d\x95\x81Loaded, Delta
02:01:21.662 B - 285907 - sbl1_efs_handle_cookies, Start
02:01:21.662 D - \x96\xd6}\xa1\x85\xb9\x91\xb1\x95}\x8d\xbd\xbd\xad\xa5\x95ͱ End
02:01:21.662 B - 290634 - Image Load, Start
02:01:21.662 - \x8a!\x81Image Loaded, Delta
02:01:21.662 B - 309087 - Image Load, Start
02:01:21.662 j\x92A5\x81Image Loaded, Delta
02:01:21.662 B - 319640 - Image Load, Start
02:01:21.662 - 20740 - APPSBL Image Loaded, Delta
02:01:21.662 B - 340380 - QSEE Execution, Start
02:01:21.662 D - 61 - QSEE Execution, Delta
02:01:21.662 B - 344650 - SBL1, End
02:01:21.862 D - 190198 - SBL1, Delta
02:01:21.862 Android Bootloader - UART_DM Initialized!!!
02:01:21.862 [0] welcome to lk
02:01:21.862
02:01:21.862 [10] platform_init()
02:01:21.862 [10] target_init()
02:01:21.862 \xab&\xea\x81MMC card: H4G2a (0.2, 05 2002), manufacturer: 90, OEM: 14a, capacity: 3909091328 bytes
02:01:21.862 [30] SDHC Running in
02:01:22.062
[70] Fastboot mode was forced with compile-time )[180] USB init ept @ 0x8f684000
02:01:22.062 [200] udc_start()
02:01:22.062 [300] -- reset --
02:01:22.062 [300] -- portchange --
02:01:22.262 [420] -- reset --
02:01:22.262 [420] -- portchange --
02:01:22.262 [550] fastboot: processing commands
02:01:23.063 [1350] fastboot: getvar:product
02:01:23.263 [1440] fastboot: download:00dbb800
02:01:23.663 [1890] fastboot: boot
02:01:23.663 [1890] decompressing kernel image: start
02:01:24.063 [2340] decompressing kernel image: done
02:01:24.063 [2340] qcom,msm-id entry not found
02:01:24.063 [2350] Only one appended non-skales DTB, select it.
02:01:24.263 [2370] Updating device tree: start
02:01:24.263 [2420] kaslr-Seed is added to chosen node
02:01:24.263 [2510] SCM call: 0x84000000 failed with :10000
02:01:24.263 [2510] PSCI v1.0 detected, skipping SMP spin table
02:01:24.263 [2530] Updating device tree+\xa6ӂ\xea\x81booting linux @ 0x80000000, ramdisk @ 0x82000000 (5738350), tags/device tree @ 0x81e00000
02:01:24.263 [2540] Jumping to kernel via monitor
02:01:24.464 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd030]
02:01:24.464 [ 0.000000] Linux version 7.2.7-aurora-bam1 (q@aiaiai) (aarch64-linux-gnu-gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #5 SMP PREEMPT Wed Sep 30 04:59:18 +06 2026
02:01:24.464 [ 0.000000] KASLR enabled
02:01:24.464 [ 0.000000] random: crng init done
02:01:24.464 [ 0.000000] Machine model: JZ08AU Aurora (RAM boot BAM1)
02:01:24.464 [ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000078b0000 (options '115200n8')
02:01:24.464 [ 0.000000] printk: legacy bootconsole [msm_serial_dm0] enabled
02:01:24.464 [ 0.000000] printk: debug: ignoring loglevel setting.
02:01:24.464 [ 0.000000] OF: reserved mem: 0x000000008e700000..0x000000008e7fffff (1024 KiB) nomap non-reusable mba
02:01:24.464 [ 0.000000] OF: reserved mem: 0x0000000086000000..0x00000000862fffff (3072 KiB) nomap non-reusable tz-apps@86000000
02:01:24.464 [ 0.000000] OF: reserved mem: 0x0000000086300000..0x00000000863fffff (1024 KiB) nomap non-reusable smem@86300000
02:01:24.464 [ 0.000000] OF: reserved mem: 0x0000000086400000..0x00000000864fffff (1024 KiB) nomap non-reusable hypervisor@86400000
02:01:24.464 [ 0.000000] OF: reserved mem: 0x0000000086500000..0x000000008667ffff (1536 KiB) nomap non-reusable tz@86500000
02:01:24.464 [ 0.000000] OF: reserved mem: 0x0000000086680000..0x00000000866fffff (512 KiB) nomap non-reusable reserved@86680000
02:01:24.464 [ 0.000000] OF: reserved mem: 0x0000000086700000..0x00000000867dffff (896 KiB) nomap non-reusable rmtfs@86700000
02:01:24.464 [ 0.000000] OF: reserved mem: 0x00000000867e0000..0x00000000867fffff (128 KiB) nomap non-reusable rfsa@867e0000
02:01:24.464 [ 0.000000] OF: reserved mem: 0x0000000086800000..0x000000008b5fffff (79872 KiB) nomap non-reusable mpss@86800000
02:01:24.464 [ 0.000000] cma: Reserved 32 MiB at 0x000000009de00000
02:01:24.464 [ 0.000000] psci: probing for conduit method from DT.
02:01:24.464 [ 0.000000] psci: PSCIv1.0 detected in firmware.
02:01:24.464 [ 0.000000] psci: Using standard PSCI v0.2 function IDs
02:01:24.464 [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
02:01:24.464 [ 0.000000] psci: SMC Calling Convention v1.0
02:01:24.464 [ 0.000000] psci: OSI mode supported.
02:01:24.464 [ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -3
02:01:24.464 [ 0.000000] Zone ranges:
02:01:24.464 [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff]
02:01:24.464 [ 0.000000] DMA32 empty
02:01:24.664 [ 0.000000] Normal empty
02:01:24.664 [ 0.000000] Movable zone start for each node
02:01:24.664 [ 0.000000] Early memory node ranges
02:01:24.664 [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000085ffffff]
02:01:24.664 [ 0.000000] node 0: [mem 0x0000000086000000-0x000000008b5fffff]
02:01:24.664 [ 0.000000] node 0: [mem 0x000000008b600000-0x000000008e6fffff]
02:01:24.664 [ 0.000000] node 0: [mem 0x000000008e700000-0x000000008e7fffff]
02:01:24.664 [ 0.000000] node 0: [mem 0x000000008e800000-0x000000009fffffff]
02:01:24.664 [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
02:01:24.664 [ 0.000000] percpu: Embedded 19 pages/cpu s48408 r0 d29416 u77824
02:01:24.664 [ 0.000000] pcpu-alloc: s48408 r0 d29416 u77824 alloc=19*4096
02:01:24.664 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
02:01:24.664 [ 0.000000] Detected VIPT I-cache on CPU0
02:01:24.664 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
02:01:24.664 [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
02:01:24.664 [ 0.000000] CPU features: detected: ARM erratum 843419
02:01:24.664 [ 0.000000] CPU features: detected: ARM erratum 845719
02:01:24.664 [ 0.000000] CPU features: detected: ARM errata 826319, 827319, 824069, or 819472
02:01:24.664 [ 0.000000] alternatives: applying boot alternatives
02:01:24.664 [ 0.000000] Kernel command line: earlycon console=ttyMSM0,115200n8 ignore_loglevel loglevel=8 rdinit=/init
02:01:24.664 [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
02:01:24.664 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
02:01:24.664 [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
02:01:24.664 [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
02:01:24.664 [ 0.000000] software IO TLB: area num 4.
02:01:24.664 [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
02:01:24.664 [ 0.000000] software IO TLB: mapped [mem 0x000000009d480000-0x000000009d580000] (1MB)
02:01:24.664 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072
02:01:24.665 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
02:01:24.665 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
02:01:24.665 [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
02:01:24.665 [ 0.000000] rcu: RCU event tracing is enabled.
02:01:24.865 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
02:01:24.865 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
02:01:24.865 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
02:01:24.865 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
02:01:24.865 [ 0.000000] Root IRQ handler: gic_handle_irq
02:01:24.865 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
02:01:24.865 [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
02:01:24.865 [ 0.000000] arch_timer: cp15 timer running at 19.20MHz (virt).
02:01:24.865 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
02:01:24.865 [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
02:01:24.865 [ 0.010993] Console: colour dummy device 80x25
02:01:24.865 [ 0.018715] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
02:01:24.865 [ 0.023192] pid_max: default: 32768 minimum: 301
02:01:24.865 [ 0.033787] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
02:01:24.865 [ 0.038209] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
02:01:24.865 [ 0.045599] VFS: Finished mounting rootfs on nullfs
02:01:24.865 [ 0.055500] rcu: Hierarchical SRCU implementation.
02:01:24.865 [ 0.057833] rcu: Max phase no-delay instances is 1000.
02:01:24.865 [ 0.062926] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
02:01:24.865 [ 0.068798] smp: Bringing up secondary CPUs ...
02:01:24.865 [ 0.076883] Detected VIPT I-cache on CPU1
02:01:24.865 [ 0.077059] CPU1: Booted secondary processor 0x0000000001 [0x410fd030]
02:01:24.865 [ 0.077913] Detected VIPT I-cache on CPU2
02:01:24.865 [ 0.078077] CPU2: Booted secondary processor 0x0000000002 [0x410fd030]
02:01:24.865 [ 0.078884] Detected VIPT I-cache on CPU3
02:01:24.865 [ 0.079041] CPU3: Booted secondary processor 0x0000000003 [0x410fd030]
02:01:24.865 [ 0.079174] smp: Brought up 1 node, 4 CPUs
02:01:24.865 [ 0.111997] SMP: Total of 4 processors activated.
02:01:24.865 [ 0.116059] CPU: All CPU(s) started at EL1
02:01:24.865 [ 0.120854] CPU features: detected: 32-bit EL0 Support
02:01:24.865 [ 0.124817] CPU features: detected: CRC32 instructions
02:01:24.865 [ 0.129962] CPU features: detected: PMUv3
02:01:24.865 [ 0.135129] alternatives: applying system-wide alternatives
02:01:25.065 [ 0.140371] Memory: 359716K/524288K available (11904K kernel code, 3340K rwdata, 5696K rodata, 1408K init, 463K bss, 129412K reserved, 32768K cma-reserved)
02:01:25.065 [ 0.145321] devtmpfs: initialized
02:01:25.065 [ 0.172997] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
02:01:25.065 [ 0.173141] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
02:01:25.065 [ 0.180266] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
02:01:25.065 [ 0.187921] 0 pages in range for non-PLT usage
02:01:25.065 [ 0.187930] 518528 pages in range for PLT usage
02:01:25.065 [ 0.198786] NET: Registered PF_NETLINK/PF_ROUTE protocol family
02:01:25.065 [ 0.204139] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
02:01:25.065 [ 0.210497] thermal_sys: Registered thermal governor 'step_wise'
02:01:25.065 [ 0.210509] thermal_sys: Registered thermal governor 'power_allocator'
02:01:25.065 [ 0.217067] cpuidle: using governor menu
02:01:25.065 [ 0.229496] NET: Registered PF_QIPCRTR protocol family
02:01:25.065 [ 0.233557] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
02:01:25.065 [ 0.238441] ASID allocator initialised with 32768 entries
02:01:25.065 [ 0.245707] Serial: AMBA PL011 UART driver
02:01:25.065 [ 0.253354] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode
02:01:25.065 [ 0.262527] /soc@0/usb@78d9000: Fixed dependency cycle(s) with /soc@0/usb@78d9000/ulpi/phy
02:01:25.065 [ 0.262637] /soc@0/usb@78d9000/ulpi/phy: Fixed dependency cycle(s) with /soc@0/usb@78d9000
02:01:25.065 [ 0.269779] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@b000000
02:01:25.066 [ 0.290718] /soc@0/usb@78d9000: Fixed dependency cycle(s) with /soc@0/usb@78d9000/ulpi/phy
02:01:25.066 [ 0.290878] /soc@0/usb@78d9000/ulpi/phy: Fixed dependency cycle(s) with /soc@0/usb@78d9000
02:01:25.066 [ 0.300510] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
02:01:25.066 [ 0.306177] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
02:01:25.066 [ 0.313023] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
02:01:25.066 [ 0.319089] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
02:01:25.066 [ 0.326035] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
02:01:25.066 [ 0.332109] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
02:01:25.266 [ 0.339054] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
02:01:25.266 [ 0.345129] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
02:01:25.266 [ 0.357403] iommu: Default domain type: Translated
02:01:25.266 [ 0.358137] iommu: DMA domain TLB invalidation policy: strict mode
02:01:25.266 [ 0.364037] pps_core: LinuxPPS API ver. 1 registered
02:01:25.266 [ 0.369183] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
02:01:25.266 [ 0.374317] PTP clock support registered
02:01:25.266 [ 0.383503] EDAC MC: Ver: 3.0.0
02:01:25.266 [ 0.387687] scmi_core: SCMI protocol bus registered
02:01:25.266 [ 0.391395] qcom_scm: convention: smc arm 32
02:01:25.266 [ 0.395043] qcom_scm firmware:scm: SHM Bridge not supported
02:01:25.266 [ 0.399739] qcom_scm firmware:scm: qseecom: found qseecom with version 0x800000
02:01:25.266 [ 0.404890] qcom_scm firmware:scm: qseecom: untested machine, skipping
02:01:25.266 [ 0.412891] FPGA manager framework
02:01:25.266 [ 0.420252] clocksource: Switched to clocksource arch_sys_counter
02:01:25.266 [ 0.422441] VFS: Disk quotas dquot_6.6.0
02:01:25.266 [ 0.428345] VFS: Dquot-cache hash table entries: 512 (4096 bytes)
02:01:25.266 [ 0.441456] NET: Registered PF_INET protocol family
02:01:25.266 [ 0.441613] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
02:01:25.266 [ 0.445986] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
02:01:25.266 [ 0.452483] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
02:01:25.266 [ 0.460715] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
02:01:25.266 [ 0.468736] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
02:01:25.266 [ 0.476560] TCP: Hash tables configured (established 4096 bind 4096)
02:01:25.266 [ 0.483529] UDP hash table entries: 256 (order: 2, 16384 bytes, linear)
02:01:25.266 [ 0.490093] NET: Registered PF_UNIX/PF_LOCAL protocol family
02:01:25.266 [ 0.496648] Unpacking initramfs...
02:01:25.266 [ 0.503520] Initialise system trusted keyrings
02:01:25.266 [ 0.505676] workingset: timestamp_bits=46 (anon: 41) max_order=17 bucket_order=0 (anon: 0)
02:01:25.266 [ 0.510400] squashfs: version 4.0 (2009/01/31) Phillip Lougher
02:01:25.266 [ 0.518405] 9p: Installing v9fs 9p2000 file system support
02:01:25.266 [ 0.524437] NET: Registered PF_ALG protocol family
02:01:25.266 [ 0.529409] Key type asymmetric registered
02:01:25.266 [ 0.534143] Asymmetric key parser 'x509' registered
02:01:25.266 [ 0.538343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239)
02:01:25.466 [ 0.543009] io scheduler mq-deadline registered
02:01:25.466 [ 0.550649] io scheduler kyber registered
02:01:25.466 [ 0.554965] io scheduler bfq registered
02:01:25.466 [ 0.568082] ledtrig-cpu: registered to indicate activity on CPUs
02:01:25.466 [ 0.568543] IPMI message handler: version 39.2
02:01:25.466 [ 0.573258] ipmi device interface
02:01:25.466 [ 0.577743] ipmi_si: IPMI System Interface driver
02:01:25.466 [ 0.581074] ipmi_si: Unable to find any System Interface(s)
02:01:25.466 [ 0.604448] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
02:01:25.466 [ 0.608500] msm_serial 78b0000.serial: msm_serial: detected port #0
02:01:25.466 [ 0.609609] msm_serial 78b0000.serial: uartclk =`+\x82r\xb2\x92\x8a\xa2\x82\x9a\xea\x81msm_serial: console setup on port #0
02:01:25.466 [ 0.621528] printk: legacy console [ttyMSM0] enabled
02:01:25.466 [ 0.621528] printk: legacy console [ttyMSM0] enabled
02:01:25.466 [ 0.630121] printk: legacy bootconsole [msm_serial_dm0] disabled
02:01:25.466 [ 0.630121] printk: legacy bootconsole [msm_serial_dm0] disabled
02:01:25.466 [ 0.644944] msm_serial: driver initialized
02:01:25.466 [ 0.648544] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208
02:01:25.466 [ 0.668025] loop: module loaded
02:01:25.466 [ 0.704549] spmi_pmic_arb 200f000.spmi: PMIC arbiter version v2 (0x20010000)
02:01:25.466 [ 0.721434] tun: Universal TUN/TAP device driver, 1.6
02:01:25.466 [ 0.722202] VFIO - User Level meta-driver version: 0.3
02:01:25.466 [ 0.730632] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: registered as rtc0
02:01:25.466 [ 0.730725] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T00:59:00 UTC (3540)
02:01:25.466 [ 0.737700] i2c_dev: i2c /dev entries driver
02:01:25.667 [ 0.751368] input: pm8941_pwrkey as /devices/platform/soc@0/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:pwrkey/input/input0
02:01:25.667 [ 0.763968] qcom_rng 22000.rng: TRNG support not detected
02:01:25.667 [ 0.766364] clocksource: arch_mmio_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
02:01:25.667 [ 0.770918] arch-timer-mmio b020000.timer: mmio timer running at 19.20MHz (virt)
02:01:25.667 [ 0.788025] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 (0,8000003f) counters available
02:01:25.667 [ 0.790909] cs_system_cfg: CoreSight Configuration manager initialised
02:01:25.667 [ 0.801629] gnss: GNSS driver registered with major 505
02:01:25.667 [ 0.806499] NET: Registered PF_INET6 protocol family
02:01:25.667 [ 0.811754] Segment Routing with IPv6
02:01:25.667 [ 0.815381] In-situ OAM (IOAM) with IPv6
02:01:25.667 [ 0.818947] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
02:01:25.667 [ 0.823540] NET: Registered PF_PACKET protocol family
02:01:25.667 [ 0.828893] 9pnet: Installing 9P2000 support
02:01:25.667 [ 0.833765] Key type dns_resolver registered
02:01:25.667 [ 0.848083] registered taskstats version 1
02:01:25.667 [ 0.848128] Loading compiled-in X.509 certificates
02:01:25.667 [ 0.874162] Freeing initrd memory: 5600K
02:01:25.667 [ 0.885055] qcom-smsm smsm: mbox_request_channel: can't parse "mboxes" property
02:01:25.667 [ 0.885110] qcom-smsm smsm: mbox_request_channel: can't parse "mboxes" property
02:01:25.667 [ 0.891222] qcom-smsm smsm: mbox_request_channel: can't parse "mboxes" property
02:01:25.667 [ 0.928490] msm_hsusb 78d9000.usb: Failed to create device link (0x180) with supplier remoteproc for /soc@0/usb@78d9000/ulpi/phy
02:01:25.667 [ 0.933965] remoteproc remoteproc0: releasing 4080000.remoteproc
02:01:25.667 [ 0.945304] remoteproc remoteproc0: releasing 4080000.remoteproc
02:01:25.867 [ 0.950128] s3: Bringing 0uV into 1250000-1250000uV
02:01:25.867 [ 0.951492] s4: Bringing 0uV into 1850000-1850000uV
02:01:25.867 [ 0.956685] l2: Bringing 0uV into 1200000-1200000uV
02:01:25.867 [ 0.961186] l5: Bringing 0uV into 1800000-1800000uV
02:01:25.867 [ 0.962510] remoteproc remoteproc0: releasing 4080000.remoteproc
02:01:25.867 [ 0.970707] l6: Bringing 0uV into 1800000-1800000uV
02:01:25.867 [ 0.971845] gcc-msm8916 1800000.clock-controller: sync_state() pending due to 4080000.remoteproc
02:01:25.867 [ 0.976903] l7: Bringing 0uV into 1800000-1800000uV
02:01:25.867 [ 0.981190] gcc-msm8916 1800000.clock-controller: sync_state() pending due to 7824900.mmc
02:01:25.867 [ 0.990726] l8: Bringing 0uV into 2900000-2900000uV
02:01:25.867 [ 0.995220] clk: Disabling unused clocks
02:01:25.867 [ 1.003374] l9: Bringing 0uV into 3300000-3300000uV
02:01:25.867 [ 1.008032] PM: genpd: Disabling unused power domains
02:01:25.867 [ 1.012451] l11: Bringing 0uV into 2950000-\xf2[ 1.027067] l13: Bringing 0uV into 3075000-3075000uV
02:01:25.867 [ 1.029152] Freeing unused kernel memory: 1408K
02:01:25.867 [ 1.031210] Run /init as init process
02:01:25.867 [ 1.033163] remoteproc remoteproc0: 4080000.remoteproc is available
02:01:25.867 [ 1.035373] with arguments:
02:01:25.867 [ 1.045254] /init
02:01:25.867 [ 1.048373] with environment:
02:01:25.867 [ 1.050615] HOME=/
02:01:25.867 [ 1.053583] TERM=linux
02:01:25.867
02:01:25.867 === AURORA RAM BOOT QMI1 ===
02:01:25.867 Linux (none) 7.2.7-aurora-bam1 #5 SMP PREEMPT Wed Sep 30 04:59:18 +06 2026 aarch64 GNU/Linux
02:01:25.867 --- model
02:01:25.867 JZ08AU Aurora (RAM boot BAM1)
02:01:25.867 --- cmdline
02:01:25.867 earlycon console=ttyMSM0,115200n8 ignore_loglevel loglevel=8 rdinit=/init
02:01:25.867 [ 1.100552] mmc0: SDHCI controller on 7824900.mm\x92\xa2ʂ\x82rj\xb5\x8d\xcb
02:01:26.067 \x81 1.220366] mmc0: Card appears overclocked; req 177770000 Hz, actual 177\x82\x8aj
02:01:26.067 [ 1.235633] mmcblk0: mmc0:0001 H4G2.&\x82\xc97
02:01:26.668 [ 1.258535] mmcblk0boot0: mmEMMC-RO-SUMMARY devices=30 all_ro=YES
02:01:26.668 [init] EMMC: all 30 block devices read-only (getro=1)[ 1.891969] [init] EMMC: all 30 block devices read-only (getro=1)
02:01:26.668
02:01:29.268 B1 modem partition by PARTLABEL: modem -> /dev/mmcblk0p1 ro=1
02:01:31.869 VV\xa2\x9a\xbabJ\xbd\x8d\xa1\x85\xc9͕\xd1\xf5iso8859-1,shortname=lower,errors=remountinit] B1: modem FAT mounted RO at /firmware, firmware path /fir[ 7.009035] [init] B1: modem FAT mounted RO at /firmware, firmware path /firmware/image
02:01:31.869 mware/image
02:01:31.869 --- /sys/class/udc:
02:01:31.869 total 0
02:01:31.869 lrwxrwxrwx 1 0 0 0 Jan 1 00:59 ci_hdrc.0 -> ../../devices/platform/soc@0/78d9000.usb/ci_hdrc.0/udc/ci_hdrc.0
02:01:31.869 [ 7.042595] configfs-gadget.aurora gadget.0: HOST MAC <MAC>
02:01:31.869 [ 7.042657] configfs-gadget.aurora gadget.0: MAC <MAC>
02:01:31.869 [ 7.048328] l13: voltage operation not allowed
02:01:31.869 [init] usb gadget bound to UDC 'ci_hdrc.0'
02:01:31.869 [ 7.058963] [init] usb gadget bound to UDC 'ci_hdrc.0'
02:01:31.869 [init] ncm ifname='usb0' dev_addr=<MAC> host_addr=2e[ 7.072606] [init] ncm ifname='usb0' dev_addr=<MAC> host_addr=<MAC>
02:01:31.869 :1a:c2:57:82:bf
02:01:31.869 3: usb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfif[ 7.087796] [init] network: usb0 172.16.42.1/24 up (static, no DHCP)
02:01:31.869 o_fast qlen 1000
02:01:31.869 link/ether <MAC> brd <MAC>
02:01:31.869 inet 172.16.42.1/24 scope global usb0
02:01:31.869 valid_lft forever preferred_lft forever
02:01:31.869 [init] network: usb0 172.16.42.1/24 up (static, no DHCP)
02:01:31.869 === EMMC-INFO-BEGIN
02:01:31.869 name=H4G2a
02:01:31.869 manfid=0x000090
02:01:31.869 oemid=0x014a
02:01:31.869 cid=<EMMC_CID>
02:01:31.870 date=05/2018
02:01:31.870 serial=0x<EMMC_SERIAL>
02:01:31.870 type=MMC
02:01:31.870 size_512=7634944 logical_block=512 bytes=3909091328
02:01:31.870 major minor #blocks name
02:01:31.870
02:01:31.870 179 0 3817472 mmcblk0
02:01:32.070 179 1 65536 mmcblk0p1
02:01:32.070 179 2 512 mmcblk0p2
02:01:32.070 179 3 512 mmcblk0p3
02:01:32.070 179 4 1024 mmcblk0p4
02:01:32.070 179 5 1024 mmcblk0p5
02:01:32.070 179 6 512 mmcblk0p6
02:01:32.070 179 7 512 mmcblk0p7
02:01:32.070 179 8 1024 mmcblk0p8
02:01:32.070 179 9 512 mmcblk0p9
02:01:32.070 179 10 512 mmcblk0p10
02:01:32.070 179 11 512 mmcblk0p11
02:01:32.070 179 12 1024 mmcblk0p12
02:01:32.070 179 13 1536 mmcblk0p13
02:01:32.070 179 14 1536 mmcblk0p14
02:01:32.070 179 15 1024 mmcblk0p15
02:01:32.070 179 16 1 mmcblk0p16
02:01:32.070 179 17 8 mmcblk0p17
02:01:32.070 179 18 10240 mmcblk0p18
02:01:32.070 179 19 32 mmcblk0p19
02:01:32.070 179 20 1536 mmcblk0p20
02:01:32.070 179 21 16 mmcblk0p21
02:01:32.070 179 22 16384 mmcblk0p22
02:01:32.070 179 23 819200 mmcblk0p23
02:01:32.070 179 24 32768 mmcblk0p24
02:01:32.070 179 25 131072 mmcblk0p25
02:01:32.070 179 26 16384 mmcblk0p26
02:01:32.070 179 27 2603455 mmcblk0p27
02:01:32.070 179 32 4096 mmcblk0boot0
02:01:32.070 179 64 4096 mmcblk0boot1
02:01:32.070 === EMMC-GPT-BEGIN (pN name start_512 size_512 ro)
02:01:32.070 mmcblk0p1 modem 131072 131072 1
02:01:32.070 mmcblk0p10 hyp 272384 1024 1
02:01:32.070 mmcblk0p11 hypbak 273408 1024 1
02:01:32.070 mmcblk0p12 pad 274432 2048 1
02:01:32.070 mmcblk0p13 modemst1 276480 3072 1
02:01:32.070 mmcblk0p14 modemst2 279552 3072 1
02:01:32.070 mmcblk0p15 misc 282624 2048 1
02:01:32.270 mmcblk0p16 fsc 284672 2 1
02:01:32.270 mmcblk0p17 ssd 284674 16 1
02:01:32.270 mmcblk0p18 splash 284690 20480 1
02:01:32.270 mmcblk0p19 DDR 393216 64 1
02:01:32.270 mmcblk0p2 sbl1 262144 1024 1
02:01:32.270 mmcblk0p20 fsg 393280 3072 1
02:01:32.270 mmcblk0p21 sec 396352 32 1
02:01:32.270 mmcblk0p22 boot 396384 32768 1
02:01:32.470 mmcblk0p23 system 429152 1638400 1
02:01:32.470 mmcblk0p24 persist 2067552 65536 1
02:01:32.470 mmcblk0p25 cache 2133088 262144 1
02:01:32.471 mmcblk0p26 recovery 2395232 32768 1
02:01:32.471 mmcblk0p27 userdata 2428000 5206911 1
02:01:32.471 mmcblk0p3 sbl1bak 263168 1024 1
02:01:32.471 mmcblk0p4 aboot 264192 2048 1
02:01:32.471 mmcblk0p5 abootbak 266240 2048 1
02:01:32.471 mmcblk0p6 rpm 268288 1024 1
02:01:32.471 mmcblk0p7 rpmbak 269312 1024 1
02:01:32.671 mmcblk0p8 tz 270336 2048 1
02:01:32.671 mmcblk0p9 tzbak 305184 1024 1
02:01:32.671 === EMMC-GPT-END
02:01:32.671 === EMMC-SHA-BEGIN
02:01:32.671 sbl1 mmcblk0p2 6a661ec947c1d935316f9d8731b5314e7502bde5825ebbfc3d2860d081b4096d
02:01:33.071 rpm mmcblk0p6 5a9b857ba6c3af1c848c6e57bbaf9cefcedc3629e5536d27e87b336c67a281fd
02:01:33.071 0479
02:01:33.671 aboot mmcblk0p4 e4addbf80eb86f6ad8b112e5a3115c7b721bbd2cca8cc109d135aeceb6194482
02:01:33.671 hyp mmcblk0p10 1a963047a4302569da2ddbda726b65c57f5181c0e290ca983dcd2fc529f74555
02:01:34.071 tz mmcblk0p8 8481892fe56fc810e4322b7e6838bf071695e4fc1380c16b21973d7fab325363
02:01:34.272 tzbak mmcblk0p9 c6f7db266a14227ca7e7b0343661089298e4c4320a9522e3e695b5e069e6b4af
02:01:34.272 === EMMC-SHA-END
02:01:34.272 === EMMC-INFO-END
02:01:34.272 B1_OK=1 (MPSS NOT started; run /bin/modem-up when ready)
02:01:34.272 === entering shell (exit restarts it) ===
02:01:34.272
02:01:34.472
02:01:34.472 BusyBox v1.37.0 (Debian 1:1.37.0-6+b9) built-in shell (ash)
02:01:34.472 Enter 'help' for a list of built-in commands.
02:01:34.472
02:02:02.680 ~ # /bin/modem-up > /tmp/modem-up.txt 2>&1; echo MODEM-UP-DONE
02:02:02.680 [ 37.822754] remoteproc remoteproc0: powering up 4080000.remoteproc
02:02:02.680 [ 37.823212] remoteproc remoteproc0: Booting fw image mba.mbn, size 234176
02:02:02.680 [ 37.872658] qcom-q6v5-mss 4080000.remoteproc: MBA booted without debug policy, loading mpss
02:02:03.881 [ 38.415448] remoteproc remoteproc0: remor[ 39.021109] wwan wwan0: port wwan0at0 attached
02:02:03.881 [ 39.022656] wwan wwan0: port wwan0at1 attached
02:02:04.081 [ 39.204328] wwan wwan0: port wwan0qmi0 attached
02:02:05.681 (cat /tmp/modem-up.txt; ls /sys/class/net; B=$(ls -d /sys/bus/platform/devices/*bam-dmux*); echo $B; readlink $B/driver; cat $B/power/runtime_status $B/power/control $B/power/autosuspend_delay_ms; dmesg | grep -iE "bam|dmux|wwan") > /tmp/out.txt; nc -l -p 5590 < /tmp/out.txt &
02:02:22.686 MODEM-UP-DONE
02:02:22.686 ~ # (cat /tmp/modem-up.txt; ls /sys/class/net; B=$(ls -d /sys/bus/platform/devic
02:02:22.686 es/*bam-dmux*); echo $B; readlink $B/driver; cat $B/power/runtime_status $B/powe
02:02:22.686 r/control $B/power/autosuspend_delay_ms; dmesg | grep -iE "bam|dmux|wwan") > /tm
02:02:22.686 p/out.txt; nc -l -p 5590 < /tmp/out.txt &
02:02:53.095 ~ # nc -l -p 5591 > /tmp/b4b1.sh &
02:02:53.095 [1]- Done nc -l -p 5590 0</tmp/out.txt
02:02:56.096 ~ # sha256sum /tmp/b4b1.sh > /tmp/out.txt; nc -l -p 5592 < /tmp/out.txt &
02:02:56.296 [2]- Done nc -l -p 5591 1>/tmp/b4b1.sh
02:02:58.097 ~ # sh /tmp/b4b1.sh > /tmp/b4b1-run.txt 2>&1; cat /tmp/b4b1-run.txt
02:04:32.328 /tmp/b4b1.sh: line 27: arithmetic syntax error
02:04:32.328 [1]+ Done nc -l -p 5592 0</tmp/out.txt
02:13:29.493 ~ # (ls -la /tmp/b4b1; cat /tmp/b4b1/mode-initial.txt /tmp/b4b1/set.txt; grep -E
02:13:29.493 "^### |Registration state|PS:|MCC|MNC|Description|\[0\]" /tmp/b4b1/reg.txt | ta
02:13:29.493 il -12) > /tmp/out.txt; nc -l -p 5593 < /tmp/out.txt &
02:13:53.900 ~ # mv /tmp/b4b1 /tmp/b4b1-attempt1; nc -l -p 5594 > /tmp/b4b1.sh &
02:13:53.900 [1]- Done nc -l -p 5593 0</tmp/out.txt
02:13:56.901 ~ # sha256sum /tmp/b4b1.sh > /tmp/out.txt; nc -l -p 5595 < /tmp/out.txt &
02:13:56.901 [2]- Done nc -l -p 5594 1>/tmp/b4b1.sh
02:13:58.901 ~ # sh /tmp/b4b1.sh > /tmp/b4b1-run.txt 2>&1; cat /tmp/b4b1-run.txt
02:21:22.224 B4B1-DONE
02:21:22.224 [1]+ Done nc -l -p 5595 0</tmp/out.txt
02:24:28.077 ~ # nc -l -p 5596 < /tmp/b4b1.tar &
02:24:58.686 ~ # (ping -c 5 172.16.42.2; cat /sys/class/remoteproc/remoteproc0/state; cat /sy
02:24:58.686 s/bus/platform/devices/4080000.remoteproc:bam-dmux/power/runtime_status; dmesg |
02:24:58.686 grep -ciE "Failed to resume") > /tmp/out.txt 2>&1; nc -l -p 5597 < /tmp/out.txt
02:24:58.686 &
02:25:02.687 [1]- Done nc -l -p 5596 0</tmp/b4b1.tar
02:29:09.168 ~ # nc -l -p 5600 > /tmp/b4b2.sh &
02:29:09.168 [2]- Done nc -l -p 5597 0</tmp/out.txt
02:29:12.168 ~ # sha256sum /tmp/b4b2.sh > /tmp/out.txt; nc -l -p 5601 < /tmp/out.txt &
02:29:12.368 [1]- Done nc -l -p 5600 1>/tmp/b4b2.sh
02:29:14.169 ~ # sh /tmp/b4b2.sh > /tmp/b4b2-run.txt 2>&1; cat /tmp/b4b2-run.txt
02:30:26.993 B4B2-STOPPED
02:30:26.993 [2]+ Done nc -l -p 5601 0</tmp/out.txt
02:39:53.995 ~ # tar -C /tmp -cf /tmp/b4b2.tar b4b2; nc -l -p 5602 < /tmp/b4b2.tar &
02:40:35.415 ~ # nc -l -p 5603 > /tmp/b4b2-post.sh &
02:40:35.415 [1]- Done nc -l -p 5602 0</tmp/b4b2.tar
02:40:38.416 ~ # sh /tmp/b4b2-post.sh; nc -l -p 5604 < /tmp/b4b2.tar &
02:40:41.017 [2]- Done nc -l -p 5603 1>/tmp/b4b2-post.sh
Reference in a new issue View git blame Copy permalink