58dcb3d121
- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff): CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp - RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not), B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason - cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation - test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
23 lines
848 B
Text
23 lines
848 B
Text
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Project Aurora - B10B-3 Test D: TEST-ONLY DTB (safety timer expiry during CHARGING, battery at ~4.0 V). Never for persistent use.
|
|
* = Test C DTB (charge 4.10 V -> VDD_MAX 0x04, HOLD 4.00 V, full-min 4.05 V, CV 5 min, IBAT_MAX 450 mA) + safety timer 8 min (TCHG_MAX 0x01),
|
|
* so the timer expires in CC, long before the CV/HOLD criterion can be met.
|
|
* Production: 4.20 V / HOLD 4.05 V / full-min 4.15 V / 60 min / 512 min (msm8916-jz08-aurora-b10b3.dts).
|
|
*/
|
|
#include "msm8916-jz08-aurora-b10b3.dts"
|
|
|
|
/ {
|
|
model = "JZ08AU Aurora (RAM boot B10B-3 Test D)";
|
|
};
|
|
|
|
&battery {
|
|
voltage-max-design-microvolt = <4100000>;
|
|
};
|
|
|
|
&pm8916_charger {
|
|
qcom,charge-timeout-minutes = <8>;
|
|
aurora,hold-voltage-microvolt = <4000000>;
|
|
aurora,full-min-voltage-microvolt = <4050000>;
|
|
aurora,cv-hold-minutes = <5>;
|
|
};
|