58dcb3d121
- LBC supervisor v1..v4 (linux/patches/b10b3-lbc-supervisor-v3.patch + b10/b10b3/lbc-v3-to-v4-fault-clamp.diff): CHARGING 4.20 V/450 mA -> HOLD 4.05 V after 60 min CV -> battery -> new cycle on USB insert; FAULT = VDD_MAX 4.00 V clamp - RAM tests C/B/D/D2/D3/D4 (safety timer only ends fast charge), B10B-4 actuator audit (VDD_MAX works, USB_SUSP does not), B10B-5 FAULT clamp regression, production run, warm reboot via PON reboot reason - cache = B10B-5 c3732515 (HW EDL write, readback + full partition verify), class-A persistent validation - test-only hooks/images are not part of the production kernel; images with the AP PSK are not published
16 lines
1 KiB
Text
16 lines
1 KiB
Text
b10/b10b3/out-t/aurora-b10b3t.img: OK
|
||
20:36:22.105 B10B3 ram2: waiting for fastboot <EMMC_SERIAL> (power off >= 90 s, then RESET held + battery -> USB)
|
||
20:38:50.475 fastboot present
|
||
Sending 'boot.img' (24998 KB) OKAY [ 0.789s]
|
||
Booting OKAY [ 0.538s]
|
||
Finished. Total time: 1.351s
|
||
rc=0
|
||
20:39:01.843 NCM ping ok
|
||
20:39:01.846 RTC at boot 4 s -> class A
|
||
~ # [6ncat /proc/device-tree/model; echo; uname -r; grep -E "START OK|FAIL in|rollb
|
||
JZ08AU Aurora (RAM boot B10B-3T TEST)
|
||
[83.25] === START OK in 73.6s (wwan0 10.84.236.56/28, routes: 10.10.22.1 194.186.191.1 77.88.8.8 1.1.1.1 )
|
||
20:40:37.957 wifi: [86.82] === AP ENABLED ssid=aurora-b8f ch=6 pid=3904 in 77.13s
|
||
20:40:45.974 sntp: [98.67] SNTP check ( 89.109.251.21 89.109.251.22 89.109.251.23): 13 replies; best offset delay server: +0.643612 0.046096 89.109.251.23: (offset > 0 = clock behind)
|
||
20:41:11.986 snapshot: 2 end markers; RP a204000.remoteproc=running
|
||
20:41:17.010 B10B3 ram2 END - operator visual check next
|